Nokia of America Corporation BBTRX-15 Benutzerhandbuch
TD-RRH8
X
20-25 P
RODUCT
D
ESCRIPTION
D
EC
2013
Document Issue: V01/ EN
|
Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
See Notice on Page 2
16
/ 20
• Consult the dealer or an experienced radio/TV technician for help.
FCC Part 68:
Not applicable for this Device
RF approval:
This equipment complies with Part 2, Sub part J-Equipment Authorization Procedures, of the FCC
Rules. This equipment complies with Part 27-Broadband Radio Service (BRS) and the Educational
Broadband Service (EBS) bands.
Rules. This equipment complies with Part 27-Broadband Radio Service (BRS) and the Educational
Broadband Service (EBS) bands.
Antenna exposure:
Antenna installations for the TDRRH shall be performed in accordance with all applicable
manufacturer's recommendations, and national laws and regulations.
manufacturer's recommendations, and national laws and regulations.
To ensure correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or regulations
regarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antenna
equipment and the integrator and builder of the site must provide sufficient information so that the
limits of the exclusion zones can be determined. Any changes to the antenna or other equipment in the
transmit path may require re-evaluation of the exposures to electromagnetic fields.
and/or field measurements to evaluate compliance with applicable national laws or regulations
regarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antenna
equipment and the integrator and builder of the site must provide sufficient information so that the
limits of the exclusion zones can be determined. Any changes to the antenna or other equipment in the
transmit path may require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part1, Subpart I, subject to the provisions of section 1.1307, all installations must
be evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure,” in
section 1.1310.
be evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure,” in
section 1.1310.
RRH meets the requirements as specified in:
x
EN 55022 / CISPR22, class B to fulfil Radiated Emissions (RE) requirement.
x
EN 55022 / CISPR22, class B to fulfil Conducted Emissions (CE) requirement.
x
IEC 61000-4-2 to fulfil Electrostatic Discharge (ESD) Immunity requirement
x
EN61000-4-3/A1 to fulfil Immunity to RF EM field (enclosure port) requirement.
x
IEC 61000-4-4 to fulfil Electrical Fast Transient (EFT) Immunity requirement.
x
IEC 61000-4-6 to fulfil Conducted Immunity requirement.
x
3GPP TS 36.113 and ETSI EN 300 386
x
ETSI TS 136 113 for Radiated Immunity
x
ETSI TS 136 113 for Conducted Immunity
x
FCC Part 15 Subpart B Class B for Radiated Immunity
x
GR-1089-CORE, Sections 3.2.2 and 3.2.3 for conducted spurious emissions
x
GR-1089-CORE, Sections 2.1.2 for ESD immunity