Nokia of America Corporation BBTRX-22 Benutzerhandbuch
Power system requirements
General
This section specifies the mechanical, electrical, and environmental requirements the
power system must meet. The following requirements apply to indoor or outdoor power
systems only.
power system must meet. The following requirements apply to indoor or outdoor power
systems only.
Alcatel-Lucent strongly recommends that the power system meet the same
environmental, safety, and regulatory requirements as the Alcatel-Lucent equipment to
maintain its safety and regulatory certification.
environmental, safety, and regulatory requirements as the Alcatel-Lucent equipment to
maintain its safety and regulatory certification.
B25 RRH4x30 interface requirements
The following table provides the interface requirements required to connect the
Alcatel-Lucent B25 RRH4x30 to a 3
Alcatel-Lucent B25 RRH4x30 to a 3
rd
party power system.
Interface
Requirement
Mechanical interface
The customer is responsible for specifying all the
mechanical requirements for the power system such as
dimensions, weights, anchoring, grounding, cabling,
cable interfaces, and installation features.
mechanical requirements for the power system such as
dimensions, weights, anchoring, grounding, cabling,
cable interfaces, and installation features.
B25 RRH4x30 interfaces
All the power system electrical interfaces are located at
the bottom of the B25 RRH4x30.
the bottom of the B25 RRH4x30.
For dimensions of the B25 RRH4x30, refer to
of this document.
Important! Under no circumstances must any
modification (e.g. drilling) be made to an
B25 RRH4x30 unless the modification is covered by
an Alcatel-Lucent "Change Notice."
modification (e.g. drilling) be made to an
B25 RRH4x30 unless the modification is covered by
an Alcatel-Lucent "Change Notice."
Electrical interface requirements
The electrical interfaces between the power system and
the B25 RRH4x30 consist of DC power and power
system alarms. All B25 RRH4x30s receive DC power
independently from the power system. All power system
alarms interface with the B25 RRH4x30.
the B25 RRH4x30 consist of DC power and power
system alarms. All B25 RRH4x30s receive DC power
independently from the power system. All power system
alarms interface with the B25 RRH4x30.
Electrical power requirements for –48‑V DC power systems
Power system requirements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
C-4
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
B25 RRH4x30
3MN-02023-0001-RJZZA
Issue 0.02
January 2015
D
R
AFT
D
R
AFT