Alcatel-Lucent USA Inc. ONEBTS-17 External Photos
APPLICANT: Alcatel-Lucent Exhibit 4A FCC ID: AS5ONEBTS-17
Alcatel-Lucent – Proprietary
Us Pursuant To Company Instructions
Page 1 of 4
EXHIBIT 4A: EXTERNAL PHOTOGRAPHS OF THE EQUIPMENT
Section 2.1033 (c)(12):
Photographs of the equipment of sufficient clarity to reveal equipment construction and layout, including
meters, if any, and labels for controls and meters and sufficient views of the internal construction to define
component placement and chassis assembly.
The UMTS 9341 RRH 40W 850 MHz Distributed Base Station (850 MHz) transceiver system, subject of
this certification, is comprised of two separate modules interconnected by fiber optic cable: 1) the digital
Base Band Unit (BBU), and 2) the RF Remote Radio Head (RRH). They have the flexibility of being
installed either in close proximity to or remotely located from each other. The BBU has the capability of
controlling up to 3 remotely located RRH units, via fiber optic cable, and incorporates the digital channel
cards, reference oscillator module, T1/E1 and alarm interface, and the RF-to-Optical and Optical-to-RF
conversion circuitry. The 850 MHz RRH incorporates the Future Technology Radio (FTR850), power
amplifier (PA) and passive filter with single transmit (Tx) and diversity receive functionality (Rx0, Rx1).
Photographs of the system equipment assembly and configuration and of the individual BBU and RRH
components are shown in this exhibit.
View Number 1:
The RRH and BBU interconnected by fiber optic cable as a system. The RRH is floor mounted on a
stand typical of installation. The BBU is also an outdoor model showing the weather protective
enclosure. This is the EMC test lab setup and configuration for conducted emissions measurement.