E F Johnson Company 2422001-1 Benutzerhandbuch
SOFTWARE
3-4
August 2000
Part No. 001-2001-200
Part No. 001-2001-200
Repeater menu. Under the menu heading Test are the
alignment procedures for the PA (see Section 7.3),
Receiver (see Section 7.1), Exciter (see Section 7.2) and overall Full Repeater (see Section 7.4) including
the MAC card (see Figure 3-1).
alignment procedures for the PA (see Section 7.3),
Receiver (see Section 7.1), Exciter (see Section 7.2) and overall Full Repeater (see Section 7.4) including
the MAC card (see Figure 3-1).
Refer to Section 7 for Alignment Procedures as
shown in the program, alignment points diagrams and
test setup diagrams.
test setup diagrams.
3.5 HELP F1
Help screens are available for most parameters
and options in this program. Whenever a parameter or
options clarification is needed, press F1 and if a help
screen is available it will pop-up on the screen. Press
Escape <ESC> to exit the pop-up screen.
options clarification is needed, press F1 and if a help
screen is available it will pop-up on the screen. Press
Escape <ESC> to exit the pop-up screen.
Figure 3-2 PROGRAMMING FLOWCHART
FILE
EDIT
HARDWARE
TEST
UTILITIES
HELP - F1
TRANSFER
Revisions
Repeater Type
Write Setup Parms F6
Read Setup Parms F5
Setup Parameters F4
RF Data
Exciter
Receiver
Display Mode
COM Port
PA
Quit ALT X
DOS Shell
Save As
Delete Repeater
Alarm Configuration
Select Repeater
Alarm Display
Load
Save
Save
Full Rptr/Station
Print Config
About...
User Level