E F Johnson Company 2424140 Benutzerhandbuch

44

•

If the radio being called is on the air, “WAIT” is 
displayed and ringing is heard until the called 
party answers or for 20 seconds, whichever 
occurs first. Pressing the PTT switch or an option 
key stops the ringing but not the call. When the 
call is answered, the voice of the called party is 
heard.

•

If the called radio does not answer within 20 
seconds, a continuous tone sounds and “NO 
ANS” is displayed. 

•

If the called radio is not on the air, a continuous 
tone sounds instead of the ringing tone and “NO 
ACK” is displayed. 

•

If the busy tone sounds and “BUSY” is displayed, 
the called radio has answered the call but the 
system is busy. When the system is no longer 
busy, the call back tone sounds.

•

If your radio or the called radio is inhibited or not 
programmed to make this type of call or for the 
requested secure mode, “Rspns Only” is 
displayed and an alert tone sounds.

•

If your radio does not have the proper encryption 
key, “KEYFAIL” is displayed and the call must 
be made in the clear mode by pressing the Clear/
Secure option key (if strapped to switchable). 
Otherwise, load the correct key.

4. When the call is finished or is not answered, end it 

by pressing the Private Call option key or the F1 
(Exit) key.

6.5.3  PLACING A STANDARD PRIVATE 

CONVERSATION CALL

1. Momentarily press the Private Call option key or 

select that menu parameter. The alias of the last 
called radio is displayed, and the private call mode 
is indicated by 

 in the display.

2. If required, select another radio by pressing the Up/

Down switch until the alias of the desired radio is 
displayed. 

3. Press the PTT sw or the F2 key to initiate the call. 

1. Press and hold the Private Call option key until a 

tone sounds (approximately 1 second). The last ID 
called is displayed, and the private call mode is indi-
cated by 

 in the display.

2. Using the 0-9 keys, dial the ID of the radio you are 

calling (all six digits). To erase the last digit, press 
the Down key, and to cancel the call, press the 
Private Call Option key again.

3. Press the PTT switch to initiate the call. If the 

entered number is valid, the display indicates the 
alias of the ID if it matches an ID in the call list. 
Otherwise, the ID you entered continues to be 
displayed. 

Events that may then occur are as follows: 

•

The called party answers the call.

•

The called party does not answer. Press the 
Private Call option key or F1 (Exit) to end the 
call.

•

If the selected radio ID is not valid, “INVALID 
ID” is displayed and an alert tone sounds.

•

If the radio system is busy, four low tones sound 
and “BUSY” is displayed. When the system is no 
longer busy, the call back tone (four beeps) is 
heard and the channel is automatically acquired. 
Press the PTT switch to continue the call.

•

If the call is in the secure mode and the radio does 
not have the proper encryption key, “KEYFAIL” 
is displayed and the call must be made in the clear 
mode by pressing the Clear/Secure option key or 
selecting that menu parameter (if strapped to 
switchable). Otherwise, load the correct key.

4. When the call is finished or if it is not answered, end 

it by pressing the Private Call option key or the F1 
(Exit) key.