E F Johnson Company 2424140 Benutzerhandbuch

47

6.7.3  INITIATING A PAGE

1. With a SMARTNET/SmartZone or P25 Trunked 

channel selected, momentarily press the Call Alert 
option switch or select that menu parameter. The 
alias of the last ID called is displayed.

2. If required, press the Up/Down switch to display the 

desired radio. The alias of each number is 
displayed. 

3. Press the PTT switch or the F2 key and one of the 

following occur:

•

If five beeps sound, the system received the page 
and the paged radio is on the air and received it. 
The page mode is automatically exited.

•

If the system received the page but the called 
radio is not on the air, a single beep sounds and 
“NO ACK” is displayed 6 seconds after the PTT 
switch is pressed. Auto exit then occurs.

The messaging feature allows preprogrammed 

messages to be sent to a dispatcher. Up to 16 messages 
can be preprogrammed, and they are identified by an 
alias. If a Message option switch or menu parameter is 
programmed, messages are sent as follows:

1. Momentarily press the Message option switch or 

select that menu parameter. The alias of the last 
message sent is displayed.

2. If required, press the Up/Down switch to display the 

desired message. Then send the message by 
pressing the F2 key or momentarily pressing the 
PTT switch. One of the following events then 
occurs:

•

If five beeps sound and “ACK RECVD” is 
displayed, the message was received and auto-
matically acknowledged by the system.

•

If after five tries the message is not acknowl-
edged, a tone sounds and “NO ACK” is 
displayed. 

The status feature allows you to manually or 

automatically send your current status to your 
dispatcher. Up to eight status conditions can be prepro-
grammed, and they are identified by an alias. If the 
Status option switch or menu parameter is 
programmed, status conditions are sent as follows:

1. Momentarily press the Status option switch or select 

that menu parameter. The alias of the current status 
condition is displayed.

2. To change the current status, press the Up/Down 

switch until the desired status is displayed. Then to 
send the status, press the F2 (Select) switch or 
momentarily press the PTT switch. One of the 
following events then occurs:

•

If five beeps sound and “ACK RCVD” is 
displayed, the status was received and acknowl-
edged by the system.

•

If after five tries the message is not acknowl-
edged, a tone sounds and “NO ACK” is 
displayed. 

6.10.1  INTRODUCTION

Emergency Alarms and Calls are separate func-

tions that can be individually enabled or disabled on 
each SMARTNET/SmartZone and P25 Trunked 
system. The Emergency option switch (or menu 
parameter) is required for these functions. Other emer-
gency features are as follows:

•

Emergency Alarms are transmitted on the selected 
talk group if emergency calls are disabled, and on 
the emergency talk group if emergency calls are 
enabled.

•

Emergency Call talk group selection priority is as 
follows. For example, if a global emergency channel 
is not programmed, the emergency talk group of the 
selected channel is used and so on.

1. Global (radio wide) emergency channel
2. Emergency group of the selected channel