E F Johnson Company 2424140 Benutzerhandbuch

Seite von 73
8
FEATURES
SECTION 1   FEATURES
NOTE: The availability of many of the following 
features is controlled by factory coding of your radio, 
installed options, firmware version, and field 
programming. Refer to Section 8 for mor
e information.
1.1 GENERAL FEATURES
The following operating modes are programmable:
– Conventional analog
– Conventional Project 25 (digital)
– Trunked Project 25 (digital)
– SMARTNET
/SmartZone
®
 trunked (analog 
or digital)
Up to 32 zones with 16 channels each (512 channels 
total) are standard. 
Large graphic display with backlight
16-position channel select switch
3-position rotary option switch
Up to 9 (limited keypad) or 21 (DTMF keypad) 
programmable option switches
Each option button programmable with a different 
function for each operating mode (Conventional, 
SMARTNET/SmartZone, Trunked P25) 
Menu mode 
AES 256-bit FIPS 140-2 approved encryption 
available on P25/digital channels
DES/DES-XL 64-bit encryption available on analog 
channels, DES-OFB on digital channels (see 
Section 10).
Emergency calls for high priority system access
Priority (standard) and Radio Wide scan modes with 
user programmable scan lists
User selectable high and low power output
Surveillance mode
Time-out timer
Keypad lock to prevent accidental key presses
Power up password to prevent unauthorized use.
Programmable and user adjustable tone volume
Programmable minimum volume level
Soft power down to prevent accidental power off
Operates on both wide and narrow band channels
1.2 CONVENTIONAL FEATURES
Up to 512 channels or talk groups programmable 
Repeater talk-around
Carrier or Call Guard
®
 (CTCSS/DCS) controlled 
squelch on analog channels, NAC and talk group 
IDs on P25 channels.
Normal/selective squelch selectable by option 
switch or menu
Monitor mode selectable by option switch or menu
Penalty and conversation timers
Dual priority channel sampling when scanning
(analog and digital channels)
Busy channel lockout (transmit disable on busy)
Unit calls on P25 channels
Telephone calls on P25 channels with overdial.
Cloning capability (wireless or using cable)
Emergency alarms and calls to alert a dispatcher of 
an emergency condition.
Single tone encoder controllable by user on analog 
channels
ANI (Automatic Number Identification) on analog 
channels 
MDC1200 ANI and Emergency Alert support.
Call Alert™ on P25 channels (send and receive 
pages).
Predefined messages (up to 16) can be sent to a
dispatcher (P25 mode only)
Predefined status conditions (up to 8) can be sent to 
a dispatcher (P25 mode only)
OTAR (Over-The-Air-Rekeying) compatible (P25 
channels only).
Keypad programming with password access 
(Federal Government users only)
1.3 SMARTNET/SMARTZONE FEATURES
Up to 512 talk groups programmable (channels 
select talk groups)
Group, Enhanced Private Conversation™, standard 
Private Conversation, and Telephone calls
Emergency alarms to alert a dispatcher of 
emergency conditions
Emergency calls for high priority system access
Failsoft operation on a predefined conventional 
channel if trunked system fails
Priority group calls detected while listening to other 
group calls when scanning
Call Alert™ (send and receive pages)
Predefined messages (up to 16) can be sent to a
dispatcher