E F Johnson Company 2425141 Benutzerhandbuch

Seite von 47
MISCELLANEOUS
46
If “PASSWORD” is briefly displayed when 
power is turned on and you are prompted to enter a 
password, the Power-Up Password feature is enabled. 
Refer to Section 3.2 for more information.
If “UNPROGRAMD” is displayed, the cause 
could be any of the following:
An unprogrammed channel is selected. Select a 
programmed channel.
The selected channel is programmed for an option 
that is not installed or an error in programming was 
detected. Reprogram the radio.
If no characters appear in the display, the battery 
may be discharged or defective. Try another battery. If 
some other problem is occurring, turn power off and 
then on again to reset the control logic. Also make 
sure that the controls are properly set. If it still does 
not operate correctly, return it for service.
NOTE: There are no user-serviceable components in 
the transceiver. Altering internal adjustments can cause 
illegal emissions, void the warranty, and result in 
improper operation that can seriously damage the 
transceiver.