E F Johnson Company 2425180 Benutzerhandbuch

3-13

September 2001

Part No. 001-5100-001

Tx Time-Out Timer - This timer limits the length of 
transmissions (Section 2.4.10). Times up to 3 min-
utes, 45 seconds in 15-second steps can be 
programmed.

Penalty Timer - This timer disables transmitting after 
the time-out timer expires (Section 2.6.7). Times up 
to 3 minutes, 45 seconds in 15-second steps can be 
programmed.

Conversation Timer - This timer limits the total 
length of a conversation (Section 2.6.8). Times up to 
7.5 minutes in 0.5-minute steps can be programmed.

Busy Channel Override - Selects if the Busy Channel 
Lockout feature can be overridden by quickly releas-
ing and then pressing the PTT switch (Section 2.6.5).

Clicking the Scan List in the left pane or that 

button in the General screen displays the following 
screen which is used to program the conventional scan 
lists described in Section 2.5.5. 

To modify a list, click 

 and the 

screen which follows is displayed. Select the desired 
scan list in the box on the top and then select the zone 
and the channels from that zone to be included. Repeat 
for each zone. Do this for each list programmed. The 

 button deletes the selected channel(s) 

from the scan list.

The following parameters are programmed in the 

preceding Conventional System Scan List Screen.

This selects if the user is allowed to edit the scan 

list. This requires the Scan Edit option switch as 
described in Section 2.6.12. User editing can be 
enabled or disabled on each scan list.

This function selects the channel on which trans-

missions occur when the PTT switch is pressed while 
scanning. In addition, it selects if priority sampling is 
used and also the type of priority channel (see 
“Priority Channel” description which follows). The 
following modes are available: