E F Johnson Company 2425331 Benutzerhandbuch

41

3. To answer the page as a private or unit call (see 

page 38), press the CALL (Private/Unit Call) option 
switch and the tag (alias) of the mobile paging you 
is displayed. Press the PTT switch and respond. One 
of the conditions that follow may also occur:

Enhanced Private Conversation™ Mode

•

If the mobile being called is on the air, ringing is 
heard until the called party answers or for 20 
seconds, whichever occurs first. If no answer 
occurs within 20 seconds, a continuous tone 
sounds and “NO ANS” is displayed.

•

If the mobile being called is not on the air, a 
continuous tone is heard instead of ringing and 
“NO ACK” is displayed.

Standard Private Conversation Mode

•

If the mobile being called is not on the air or does 
not answer, you will simply not hear a response.

4. When the call is finished or it could not be 

completed for some reason, end it by pressing the 
CALL option switch and placing the microphone 
back on-hook.

Initiating a Page

1. With a SMARTNET/SmartZone or P25 trunked 

channel selected, momentarily press the ALERT 
option switch. The tag (alias) of the last ID called is 
displayed.

2. If required, rotate the Select switch to display the 

desired mobile. The tag of each number is 
displayed. 

3. Press the PTT switch and one of the following then 

occur:

•

If five beeps sound, the system received the page 
and the paged mobile is on the air and received 
it. The page mode is automatically exited.

•

If the system received the page but the called 
mobile is not on the air, a single beep sounds and 
“NO ACK” is displayed 6 seconds after the PTT 
switch is pressed. Auto exit then occurs. 

The messaging feature allows preprogrammed 

messages to be sent to your dispatcher. Up to 16 
messages can be preprogrammed, and they are identi-
fied by an alias. If an MSG option switch is 
programmed, messages are sent as follows:

1. Momentarily press the MSG option switch. The 

alias of the last message sent is displayed.

2. If required, rotate the Select switch to display the 

desired message. Then send the message by 
momentarily pressing the PTT or Select switch. One 
of the following then occurs:

•

If five beeps sound and “ACK RCVD” is 
displayed, the message was received and automat-
ically acknowledged by the system.

•

If after five tries the message is not acknowledged, 
a tone sounds and “NO ACK” is displayed. 

The status feature allows you to manually or 

automatically send your current status to your 
dispatcher. Up to eight status conditions can be prepro-
grammed, and they are identified by a tag (alias). If the 
STATUS option switch is programmed, status condi-
tions are sent as follows:

1. Momentarily press the STATUS option switch. The 

tag of the current status condition is displayed.

2. To change the current status, rotate the Select switch 

or press the PTT switch until the desired status is 
displayed. Then press the Select switch to accept 
that status. One of the following conditions then 
occurs:

•

If five beeps sound and “ACK RCVD” is 
displayed, the status was received and acknowl-
edged by the system.

•

If after five tries the message is not acknowledged, 
a tone sounds and “NO ACK” is displayed.