E F Johnson Company 2425372 Benutzerhandbuch
Draft
December 2006
5300 ES Series Mobile Radio Operating Manual -17
INVENTORY
0x0D
INVENTORY RESPONSE
0x0E
MODIFY KEY
0x13
MODIFY KEYSET ATTRIBUTES
0x14
MODIFY KEYSET ATTRIBUTES RESPONSE
0x15
NEGATIVE ACK
0x16
NO SERVICE
0x17
REKEY ACK
0x1D
REKEY
0x1E
WARM START
0x20
ZEROIZE
0x21
ZEROIZE RESPONSE
0x22
11.6.2 UCM Equipped 5300 ES
The 5300 ES UCM versions (see Section 9) use the Motorola UCM encryption module.
Therefore, the OTAR capabilities are determined by that module. All capabilities of the
Motorola KVL and KMF are supported. Initial radio programming by the PC Configure
software is the same as described in Section 11.5.
Therefore, the OTAR capabilities are determined by that module. All capabilities of the
Motorola KVL and KMF are supported. Initial radio programming by the PC Configure
software is the same as described in Section 11.5.
11.6.3 OTAR Option Switches
The following additional option switches can be programmed with the 5300 ES mobile to
control OTAR functions.
control OTAR functions.
Change Keyset - Toggles the active keyset between Keyset 1 and Keyset 2. The new
active keyset is briefly displayed and then normal operation resumes. To change to the
other keyset, highlight it and press the <F2> key.
active keyset is briefly displayed and then normal operation resumes. To change to the
other keyset, highlight it and press the <F2> key.
Clear/Secure Select - This enables and disables encryption regardless of whether
OTAR is used. Refer to Section 11.3 for more information.
OTAR is used. Refer to Section 11.3 for more information.
Erase Keys - Erases all TEK and KEK keys contained in the radio.
Key Select - This allows a different key to be selected for the current channel or group
(conventional channels only). Refer to Section 11.2.4 for more information.
(conventional channels only). Refer to Section 11.2.4 for more information.
OTAR Rekey Request - Sends a message which tells the KMF that the radio is on the
air and requests rekeying. The following status messages are displayed which indicate
the progress of this function.
air and requests rekeying. The following status messages are displayed which indicate
the progress of this function.
Rekeying - A radio-initiated rekeying session is in process.