E F Johnson Company 2425372 Benutzerhandbuch
Draft
-2 5300 ES Series Mobile Radio Operating Manual
December 2006
The Home Zone and Channel are preprogrammed. With the “Last Zone”/“Home Channel”
configuration, the programmed home channel number of the last active zone is selected. If
this channel number is not programmed in the active zone, “Unprogramd” is displayed.
With earlier models, the last selected channel is displayed when powering up on the last
selected zone, and the home channel is displayed when powering up on the home zone.
configuration, the programmed home channel number of the last active zone is selected. If
this channel number is not programmed in the active zone, “Unprogramd” is displayed.
With earlier models, the last selected channel is displayed when powering up on the last
selected zone, and the home channel is displayed when powering up on the home zone.
Note
In dual control configurations (front mount radio with remote control unit), the power
switches at both control points must be off for power to turn off.
switches at both control points must be off for power to turn off.
3.1.1 Setting Volume Level
The relative volume setting can be determined using a reference tone as follows:
• If the key press tones are enabled (see Section 4.5), a short tone sounds when an option
switch is pressed or the Select switch is pressed or rotated.
• If a conventional channel is selected, take the microphone off-hook and if someone is
talking, voice may be heard. If the MON (Monitor) option switch is programmed (see
Section 5.3 on page 25), pressing it unsquelches the radio and either voice or
background noise is heard. If a SMARTNET/SmartZone or P25 trunked channel is
selected, the radio cannot be manually unsquelched.
Section 5.3 on page 25), pressing it unsquelches the radio and either voice or
background noise is heard. If a SMARTNET/SmartZone or P25 trunked channel is
selected, the radio cannot be manually unsquelched.
3.2
Power-Up Password
The power-up password feature prevents unauthorized use of the radio by requiring that an
eight-digit password be entered to make it operational. This feature is enabled or disabled
by programming.
eight-digit password be entered to make it operational. This feature is enabled or disabled
by programming.
When it is enabled, “ENTER PSWD” is briefly displayed when power is turned on, the
eight-digit numeric password must be entered by pressing and rotating the Select switch. If
an incorrect password is entered, “INCORRECT” is displayed and it must be re-entered.
eight-digit numeric password must be entered by pressing and rotating the Select switch. If
an incorrect password is entered, “INCORRECT” is displayed and it must be re-entered.
3.2.1 Password Features With Later Models
An enhanced password scheme allows up to four power-on (user) passwords, download
and upload passwords, and a master password to be programmed.
and upload passwords, and a master password to be programmed.
The current User password can be changed if the “PW CHG” option switch is
programmed. Selecting this function displays prompts for entering and confirming a new
password. Refer to Section 10 for more information on passwords.
programmed. Selecting this function displays prompts for entering and confirming a new
password. Refer to Section 10 for more information on passwords.