E F Johnson Company 2425720 Benutzerhandbuch
Viking™ VP600 Portable Radio Operating Manual
6-9
SmartNet / SmartZone / P25 Trunked Features
Standard Mode
• If the radio being called is not on the air or does not answer, you will not hear a
response.
• When the call is finished or it could not be completed for some reason, end it by
pressing the
(Clear) button.
6.5.2 Initiating a Page
To initiate a page:
1 With a SmartNet/SmartZone or P25 Trunked channel selected, momentarily press the
Call Alert option button or select that menu parameter. The alias of the last ID called is
displayed.
displayed.
2 If required, press the Up/Down buttons to display the desired radio. The alias of each
number is displayed.
3 Press the PTT switch and one of the following occur:
- If five beeps sound, the system received the page and the paged radio is on the air and
received it. The page mode is automatically exited.
- If the system received the page but the called radio is not on the air, a single beep
sounds and “No Ack” is displayed six seconds after the PTT switch is pressed. Auto
exit then occurs.
exit then occurs.
6.6
Messaging
The messaging feature allows pre-programmed messages to be sent to a dispatcher. Up to
255 messages, identified by an alias, can be pre programmed. If a Message option button
or menu parameter is programmed, messages are sent as follows:
255 messages, identified by an alias, can be pre programmed. If a Message option button
or menu parameter is programmed, messages are sent as follows:
Note
This feature is not available with P25 trunked operation.
1 Momentarily press the Message option button or select that menu parameter. The alias
of the last message sent is displayed.
2 If required, press the Up/Down buttons to display the desired message. Then send the
message by pressing the
(Menu) button or momentarily pressing the PTT switch.
One of the following events then occurs:
- If five beeps sound and “Ack Received” is displayed, the message was received and
automatically acknowledged by the system.