E F Johnson Company 2425M70 Benutzerhandbuch
7-5
SMARTNET / SmartZone / P25 Trunked Features
• Unlimited - Unit IDs can be selected from a list and also dialed directly using the front
panel controls or the keypad on the HHC.
7.4.1
Placing an Enhanced Private Conversation Call
To recall from a list:
1 Momentarily press the Private Call option switch or select the menu parameter. The
alias of the last called mobile is displayed.
2 To select another mobile, rotate the Select switch until the alias for the desired mobile
is displayed.
3 Press the PTT switch and one of the following events then occurs:
(Proceed to the bulleted list which follows Item 3 in the next section for events that may
occur next.)
occur next.)
To make direct entry using front controls or the keypad on the HHC:
1 Press and hold the Private Call option key until a tone sounds (approximately one
second). The last ID called is displayed.
2 If using the front panel controls, enter the ID of the radio you are calling (five digits for
Private Call or eight digits for Unit Call) by rotating and pressing the Select switch. A
single beep sounds when the switch is pressed (if that option is selected). With the
Hand-Held Control Unit (HHC), enter the number using the DTMF keypad. To cancel
the call, press the Private Call Option key again.
single beep sounds when the switch is pressed (if that option is selected). With the
Hand-Held Control Unit (HHC), enter the number using the DTMF keypad. To cancel
the call, press the Private Call Option key again.
3 Press the PTT switch to initiate the call. If the entered number is valid, the display
indicates the alias of the ID if it matches an ID in the call list. Otherwise, the ID you
entered continues to be displayed.
entered continues to be displayed.
Events that may then occur are as follows:
- If the mobile being called is on the air, “WAIT” is displayed and ringing is heard
until the called party answers or for 20 seconds, whichever occurs first. Pressing the
PTT or an option switch stops the ringing but not the call. When the call is answered,
the voice of the called party is heard.
PTT or an option switch stops the ringing but not the call. When the call is answered,
the voice of the called party is heard.
- If the called mobile does not answer within 20 seconds, a continuous tone sounds and
“NO ANS” is displayed.
- If the called mobile is not on the air, a continuous tone sounds instead of the ringing
tone and “NO ACK” is displayed.
- If the busy tone sounds and “BUSY” is displayed, the called mobile has answered the
call but the system is busy. When the system is no longer busy, the call back tone
sounds.
sounds.
Draft 4/29/2014