E F Johnson Company 2425M80 Benutzerhandbuch
Draft 02 - Sep 1 2015
5-19
Conventional Mode Features
Inhibit/Uninhibit Commands - Command to inhibit (disable) and uninhibit (enable)
mobile access to the radio system.
mobile access to the radio system.
5.12.6 GE Star
GE Star signaling is implemented for transmit functionality. Two programming modes are
available:
available:
Standard format (normal ANI for pre- and post- ANI and RTT and emergency).
NYSP format (emergency)
5.13
Project 25 Mode Features
The following features are unique to conventional P25 channels.
5.13.1 Digital Unit ID
Each radio that operates on Project 25 (digital) channels is programmed with an up-to-
eight-digit unit ID. This ID is unique for each radio and can be any number from 1-
16,777,215. When power is turned on with a Project 25 channel selected, this ID is briefly
displayed.
eight-digit unit ID. This ID is unique for each radio and can be any number from 1-
16,777,215. When power is turned on with a Project 25 channel selected, this ID is briefly
displayed.
5.13.2 Talkgroup ID
Each Project 25 channel is programmed with a group ID that determines which group of
radios will receive the call. A call is received on a channel if a selected or scanned channel
is programmed with that ID and the correct NAC is detected (see following). Group IDs
can be any number from 1-65,535. Group ID detect can be disabled by the Normal/
Selective squelch function described in Section 5.4 and the Monitor Mode described in
Section 5.2.
radios will receive the call. A call is received on a channel if a selected or scanned channel
is programmed with that ID and the correct NAC is detected (see following). Group IDs
can be any number from 1-65,535. Group ID detect can be disabled by the Normal/
Selective squelch function described in Section 5.4 and the Monitor Mode described in
Section 5.2.