E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

6-2

Pressing the Radio Info button (if programmed) or selection of the menu parameter allows 
the user to display the ID programmed for the currently selected protocol. If the radio is on 
a digital conventional channel, it shows the digital conventional ID. If the radio is 
currently on a SmartNet/SmartZone or P25 Trunking channel location, it shows the ID 
associated with that protocol. This feature also shows the following items:

• Radio Alias
• Radio  Tag
• Profile Tag
• Unit ID for active protocol
• Encryption Key location programmed for the currently selected channel
• Over the Air IP Address
• ESN
• SEM
• MAC Address
• Ethernet IP Address
• Wi-Fi  Menu
• Band
• Current Software version in the radio

Standard calls are between you and another mobile, group of mobiles, or a control station 
(a radio in a fixed location). Most calls are probably this type. Proceed as follows to place 
and receive group calls.

To place a Standard Group Call:

1 Turn power ON and set the volume as described in Section 3. Select the channel 

programmed for the talkgroup you want to call (see Section 3.1.7.1).

2 If the talkgroup is programmed for encryption and is not strapped to Clear or Secure, 

select the desired mode by pressing the Clear/Secure option switch, soft button 
(Lightning Control Head only), or selecting the menu parameter. The status of that 
switch is ignored if the talkgroup is strapped to Clear or Secure, or if the “Ignore Clear/
Secure Switch when Strapped” is programmed. When you change to Secure mode, the 
display will briefly display the Key Alias assigned to this encryption key. Refer to 
Section 7.3 for more information.