E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

6-10

To answer a Page:

1 When a page is received, five beeps sound and “PAGE RECVD” (Standard Control 

Head) or “Page Receive” (Lightning Control Head) is displayed. The ID of the radio 
paging you is stored as the last ID received.

2 To clear or ignore the page, press any option switch. If the PTT switch is pressed, a 

group call is placed on the selected channel.

3 To answer the page as a unit call (see Section 6.4), press the Unit Call option switch, 

soft button (Lightning Control Head), or select the menu parameter. The Call Response 
button, soft button (Lightning Control Head only), or menu selection can also be used. 
If the ID of the radio paging you is in the Call list, the display will toggle between the 
Calling ID and the Alias. If not, only the Calling ID is displayed. Press the PTT switch 
and respond. 

4 When the call is finished or it could not be completed for some reason, end it by 

pressing the Unit Call option switch and placing the microphone back on-hook, or by 
pressing the appropriate exit button.

To initiate a page by recall from a list:

1 With a SMARTNET/SmartZone or P25 trunking channel selected, momentarily press 

the CALL ALERT option switch. The tag (alias) of the last ID called is displayed. 
CALL ALERT also can be selected from the menu and soft buttons (Lightning Control 
Head only).

2 If required, rotate the Select switch to display the desired mobile. The tag of each 

number is displayed.

3 Press the PTT switch and one of the following then occur:

- If five beeps sound, the system received the page and the paged mobile is on the air 

and received it. The page mode is automatically exited.

- If the system received the page but the called mobile is not on the air, a single beep 

sounds and “NO ACK” (Standard Control Head) or “No Acknowledge” (Lightning 
Control Head) is displayed six seconds after the PTT switch is pressed. Auto exit then 
occurs.

To make direct entry from the Menu (scroll down to select direct entry) or by using front 
panel controls or Digital Keypad microphone.

1 Press and hold the Unit Call option key until a tone sounds (approximately one second). 

The last ID called is displayed.