E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

9-5

DENIED

“Denied”
“DENIED”
“Denied”

This error indicates that a group call attempt has received a 

DENIED response from the system.

DENY

“Deny”
“DENY”
“Deny”

This error indicates that a unit or interconnect call attempt has 

received a DENIED response from the system.

DISABLED

“Disabled”
“DISABLED”
“Disabled”

This error indicates that the feature that the user is attempting 

to use has been disabled on the radio either by programming 

or by factory options.

DSP_FAILED

“DSP Failed”
“DSP FAILED”
“DSP Failed”

This error indicates that the DSP failed to complete its startup 

procedure at powerup. This is also indicated with 7 orange 

blinks of the LED. 

ENCRYPTION_FAIL

“Encrypt Bad”
“ENCRYP BAD”
“Encryption Bad”

This error indicates that the main processor and the 

encryption module have failed to complete their startup 

procedure at powerup. This error is also indicated with 11 

orange blinks of the LED.

FIXED_AUTO

“Fixed Auto”
“FIXED AUTO”
“Fixed Auto”

This error indicates that the selected channel or group is 

strapped to auto power and thus high/low power cannot be 

selected.

FIXED_HIGH

“Fixed High”
“FIXED HIGH”
“Fixed High”

This error indicates that the selected channel or group is 

strapped to high power and thus low power cannot be 

selected.

FIXED_LOW

“Fixed Low”
“FIXED LOW”
“Fixed Low”

This error indicates that the selected channel or group is 

strapped to low power and thus high power cannot be 

selected.

HC08_FAILURE

“HC08 Failure”
“HC08 FAIL”
“HC08 Failure”

The HCO8 was not initialized correctly and cannot be 

accessed for flash reads and writes, etc. This error will also be 

indicated with 9 orange blinks of the LED. 

INVALID_USER

“Invalid User”
“INVLD USR”
“Invalid User”

This error indicates that the user’s radio ID was rejected by 

the system. This message is primarily related to data 

registrations.

KEY_FAIL

“Key Fail”
“KEY FAIL”
“Key Fail”

This error indicates that the encryption key required by the 

current selected group / channel is not valid or does not exist.

KEYPAD_LOCKED

“Kypd Locked”
“KYPD LCKED”
“Keypad Locked”

This error indicates that the keypad lock function is active and 

key presses are not accepted in this mode.

KEYSET_FAIL

“Kset Fail”
“KSET FAIL”
“Keyset Fail”

This error indicates that the radio was not able to activate the 

encryption keyset chosen by the user.

LIST_FULL

“List Full”
“LIST FULL”
“List Full”

This error occurs during Scan Edit when a user attempts to 

add too many channels to the scan list.