E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

3-13

the radio per system and zone. The Single Touch buttons are press and hold buttons 
preventing a user from sending statuses, messages, and calls by accident. On a Single 
Touch button press, the radio displays two dual temp messages; the first displays which 
Single Touch button was pressed along with the press and hold message. The second 
displays the Alias and the ID/Phone Number (If applicable – for Status and Message only 
the Alias is displayed since neither has an ID).

1 The Single Touch buttons are activated on a press and hold which will be in the range 

of 0.5 to 2.5 seconds. This is set in Armada.

2 Both physical and soft buttons may be used for Single Touch, but it is not available as a 

menu item.

3 If a Single Touch button is pressed, or pressed and held, but the Feature combo box is 

set to Disabled, then “Disabled” is displayed along with a short bad beep tone.

4 The supported Single Touch functions for each system are shown below.

The following describes how each supported Single Touch function operates, and how it 
varies slightly from system to system. As a note, only Digital conventional channels 
support Single Touch. If a Single Touch button is used on an Analog Conventional 
channel, the temporary message “Analog” is displayed.

This is the only function that requires the user to press the PTT to send the call.

Disabled







-

Unit Call







Call List

Call Alert







Call List

Status







Status List

Message





Message Aliases List

Interconnect Call





Phone List