E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

3-18

3 If it is set to Disabled or Response Only; when the Single Touch button is pressed and 

held the radio will display “Disabled”, “RSPNS ONLY” (Standard Control Head), or 
“Response Only” (Lightning Control Head).

4 The alias of the radio being called will be displayed. 

5 The operation will now continue the same as a normal Unit Call.

6 If the radio called does not answer, a no ack message is displayed. When this is 

displayed any key on the radio exits the Unit Call.

7 To exit the call either press the Clear button or the Single Touch button assigned to Unit 

Call.

1 When receiving a Unit Call, press and hold the Single Touch button assigned to Unit 

Call.

2 Then press the PTT button to answer the Unit Call.

3 For the radio to receive, the Unit Call Usage in Armada under Systems (Smartnet/

Smartzone) → Lists → Call Settings must be set to Response Only, List Only, or 
Unlimited.

4 Once the received Unit Call is active, operation continues as normal for Unit Call.

5 The alias of the calling radio will be displayed.

6 To exit the call either press the Clear button or the Single Touch button assigned to Unit 

Call.

1 To send a Call Alert, press and hold the Single Touch button assigned to Call Alert.

2 For the radio to send the Call Alert, the Unit Call Usage in Armada under Systems 

(Smartnet/Smartzone) → Lists → Call Settings must be set to List Only or Unlimited.

3 The Unit ID the radio is sending to is shortly displayed followed by the wait message 

until an Ack or No Ack message is displayed.

4 Once the alert is sent, operation continues as normal for Call Alert and all buttons that 

are available in Call Alert are available in Single Touch Call Alert.

5 To exit before those messages either press the Clear button or the Single Touch button 

assigned to Call Alert.