E F Johnson Company 2425M80 Benutzerhandbuch
Draft 02 - Sep 1 2015
4-12
Radio Wide Features
4.12.5 Nuisance Channel Delete
With priority scanning, channels can be temporarily deleted from the scan list, for
example, if messages become annoying. This feature is not available with radio wide
scanning. Channels can also be permanently added or deleted from a scan list as described
in the next sections. Proceed as follows to temporarily delete a channel:
example, if messages become annoying. This feature is not available with radio wide
scanning. Channels can also be permanently added or deleted from a scan list as described
in the next sections. Proceed as follows to temporarily delete a channel:
Note
The selected channel and also conventional priority channels cannot be deleted from the
scan list.
scan list.
1 While receiving a message on the channel to be deleted, press and hold the SCAN
option switch until a tone sounds (based on radio programming). The channel is then
deleted and scanning of the remaining channels in the scan list resumes.
deleted and scanning of the remaining channels in the scan list resumes.
Note
Pressing and holding this switch with scanning OFF may select the scan list. Refer to
Section 5.10.1 for more information.
Section 5.10.1 for more information.
2 Deleted channels are added back into the scan list if any of the following events occur:
- Scanning is turned OFF and then ON again using the SCAN option switch.
- Radio power is turned OFF and then ON again.
- The scan list is reselected by changing channels (SMARTNET/SmartZone) or using
the SCAN option switch (conventional).
4.13
Scan Lists
Priority and Radio Wide Scan lists can be programmed.
Note
With scan disabled by programming, the user can reset the scan lists to their default
programmed state. Pressing and holding the Scan Edit button allows the user to access the
feature. “RSET LISTS” (Standard Control Head) or “Reset Lists” (Lightning Control
Head) will be displayed. Pressing the select key will reset the lists and “LISTS RSET”
(Standard Control Head) or “Lists Reset” (Lightning Control Head) will be temporarily
displayed before returning the user to the main display. Selecting Exit will return the user
to the main display without reverting the scan lists. Pressing and holding Scan Edit while
scan is on will result in a “tone bad” beep. This shall only be accessible through a
function button press and hold and is not implemented though a menu item.
programmed state. Pressing and holding the Scan Edit button allows the user to access the
feature. “RSET LISTS” (Standard Control Head) or “Reset Lists” (Lightning Control
Head) will be displayed. Pressing the select key will reset the lists and “LISTS RSET”
(Standard Control Head) or “Lists Reset” (Lightning Control Head) will be temporarily
displayed before returning the user to the main display. Selecting Exit will return the user
to the main display without reverting the scan lists. Pressing and holding Scan Edit while
scan is on will result in a “tone bad” beep. This shall only be accessible through a
function button press and hold and is not implemented though a menu item.