Honeywell International Inc. WFSPS Benutzerhandbuch
42
SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:E 11/9/2017
Section 5: USB Adapter
5.1 Introduction
The W-USB is a software interface that can be connected to a PC (running SWIFT Tools) through a USB port. It communicates with the
RF devices using the same frequencies as the mesh protocol. This device is powered directly by the USB port.
The LED gives an indication of power and initialization status.
RF devices using the same frequencies as the mesh protocol. This device is powered directly by the USB port.
The LED gives an indication of power and initialization status.
The W-USB has an adjustable USB connector to facilitate connection by reducing the size when connected to a laptop/tablet.
5.2 Agency Approvals
5.2.1 FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
FCC ID: PV3WFSADPT
5.2.2 Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1.
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
1.
autorisée aux deux conditions suivantes :
1.
L'appareil ne doit pas produire de brouillage, et
2.
L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
IC: 12252A-WFSADPT
5.2.3 Federal Institute of Telecommunications
This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).
IFT: RCPSYWU14-1829
IFT: RCPSYWU14-1829
5.3 Specifications
5.3.1 Electrical Specifications
•
Operating voltage: 4.3 VDC - 5.5 VDC (5VDC typical)
Color
Description
Red
Device has power but is not initialized or the driver is missing.
Yellow
Device is initialized and ready.
Blue
Device is updating or failed to load properly. Complete the update or re-
power the device. If problems persist, contact technical support.
power the device. If problems persist, contact technical support.
Figure 5.1 USB Adapter
usb
.w
m
f
!
WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.