Honeywell International Inc. WFSSM Benutzerhandbuch
SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000SK-E:B 11/9/2017
57
LED Pattern
Condition
Action Required
Bootloader normal
Slot request rejected
Mesh forming
Sustained tamper
Bootloader firmware
update
update
Profile received
Battery check: all
batteries are fresh
batteries are fresh
Profile removed
Device is ready to update
Device is not permitted into the mesh
Device is part of the mesh and looking
for devices that are not in the mesh
for devices that are not in the mesh
New application code is being
downloaded
downloaded
Device now has a profile assigned
Maximum battery life remaining in
device
device
Device has returned to the factory
default mode
default mode
Legend
Number of blinks
LED color
Interval between blink patterns
Duration of LED state
Indicates value is approximate
LED color
Interval between blink patterns
Duration of LED state
Indicates value is approximate
Two blinks in this pattern
First blink is green. Second is yellow
7 seconds between blink patterns
Will transition to next state after
approximately 20 minutes
First blink is green. Second is yellow
7 seconds between blink patterns
Will transition to next state after
approximately 20 minutes
Example:
All units are in seconds. Minute is indicated by “M”.
Confirm device count and software
version
version
Device is tampered
Solid
Solid
Distributor mode
Device is distributing its profile to other
devices which requested a profile.
devices which requested a profile.
8
6
20
M
15
5
1
10
2.5
0.5
Ensure detector is seated in the base
and the module has the faceplate on
and the module has the faceplate on
12
3
M
Rescue mode
Device is in the mesh and
looking for lost devices
looking for lost devices
Normal mode or
tested walktest
tested walktest
Device is in the mesh or it has
been tested in a walktest.
been tested in a walktest.
7
20
M
Figure D.3 Device LED Patterns
Use SWIFT Tools to initiate download
Self test fail
Low battery cut-off
Device has failed internal self
diagnostics.
diagnostics.
Device is functioning.
Replace batteries
Restart the device. If problem
persists, contact technical support
persists, contact technical support
1
Solid
Active/Alarm state
3
18
3
Device has been activated
Active/Alarm state
Device has been activated
Mesh update -parent
node
node
The gateway is updating parent nodes
in the mesh
in the mesh
X
Solid
X
10
Mesh update idle
Devices that are included in mesh
update are complete and waiting for
the whole mesh to finish updating
update are complete and waiting for
the whole mesh to finish updating
Mesh updating
Green and yellow flicker pattern
indicates that data packets are being
received by the device.
indicates that data packets are being
received by the device.
0
le
dd
ev1
_3.
0.w
m
f