Vertex Standard USA Inc. 11373020 Benutzerhandbuch
12
EVX-261 O
PERATING
M
ANUAL
O
PERATION
noise and resume normal
(quiet) monitoring.
(quiet) monitoring.
To transmit, monitor the
channel and make sure it
is clear.
is clear.
Press and hold the
PTT
switch. Speak into the
microphone area of the
front panel grille in a
normal voice level. To return to the Receive mode, re-
lease the
microphone area of the
front panel grille in a
normal voice level. To return to the Receive mode, re-
lease the
PTT switch.
Press (or press and hold)
the
SIDE-1 or SIDE-
2 button to activate one
of the pre-programmed
functions programmed
using
of the pre-programmed
functions programmed
using
CE156 software
by your Vertex Standard
authorized dealer. See the next chapter for details re-
garding feature availability for this radio.
authorized dealer. See the next chapter for details re-
garding feature availability for this radio.
If a Speaker/Microphone
is available, remove the
plastic cap and its two
mounting screws from
t h e r i g h t s i d e o f t h e
transceiver, then insert
the plug of the Speaker/
M i c r o p h o n e i n t o t h e
M I C / S P jack; secure
the plug using the screws supplied with the Speaker/
Microphone. Hold the speaker grille up next to your
ear while receiving. To transmit, press the
plastic cap and its two
mounting screws from
t h e r i g h t s i d e o f t h e
transceiver, then insert
the plug of the Speaker/
M i c r o p h o n e i n t o t h e
M I C / S P jack; secure
the plug using the screws supplied with the Speaker/
Microphone. Hold the speaker grille up next to your
ear while receiving. To transmit, press the
PTT switch
on the Speaker/Microphone, just as you would on the
main transceiver’s body, and speak into the micro-
phone on a normal voice level.
main transceiver’s body, and speak into the micro-
phone on a normal voice level.
Note 1): Save the original plastic cap and its mount-
ing screws. They should be reinstalled when not us-
ing the Speaker/Microphone.
ing screws. They should be reinstalled when not us-
ing the Speaker/Microphone.
2) When you press the PTT switch on the Speaker/
Microphone, it disables the internal microphone, and
vice versa.
Microphone, it disables the internal microphone, and
vice versa.
This radio have two modes of DMR operation to max-
imize spectrum effi ciency. Standard operation requires
use of a TDMA repeater (such as the
use of a TDMA repeater (such as the
EVX-R70) to
utilize the repeater’s dual time slot capability for dou-
bling your radio fleet’s communication paths for up
bling your radio fleet’s communication paths for up
Exhibit 8: Operating Manual
FCC ID: AXI11373020
IC: 10239A-11373020
Vertex Standard LMR, Inc.