Vertex Standard USA Inc. 11464620 Benutzerhandbuch

 (Auto Range Transpond System)

This system is designed to inform the operator when you 
and another ARTS™-equipped transceivers and stations 
are within communication range using the DCS Encoder/
Decoder.

During ARTS™ operation, when the radio receives an 
incoming ARTS™ signal, a short single beep will sound 
and “IN SERV” (“In Service”) will be indicated on the 
display for 2 seconds. If you move out of range for more 
than two minutes, your radio senses that no signal has 
been received, causing a short triple beep to sound and 
“OUT SERV” (“Out of Service”) will be indicated on the 
display for 2 seconds. Moving back into communications 
range as the ARTS™ signal transmission from another 
transceiver or station is back in range, a short single beep 
will again sound and “IN SERV” (“In Service”) will be 
indicated on the display for 2 seconds.

In order to prevent accidental channel changes or inadver-
tent transmissions, various aspects of the Programmable 
keys and 

PTT switch may be locked.

To activate the locking feature, press and hold the 
[MODE(

)] key.

To cancel the key locking, press and hold the [

MODE(

)] 

key again.

You may change the lockout confi guration by the “User 
Set (Menu)” mode. See page 36 for more information.

Exhibit 8: Operating Manual

FCC ID: AXI11464620

IC: 10239A-11464620

Vertex Standard LMR, Inc.