Motorola Solutions Inc. 92FT7118 Benutzerhandbuch

Notice: Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility. It may be necessary to
conduct compatibility testing to determine if any electronic equipment used
in or around vehicles or near fixed sites equipped with mobile radio
equipment is susceptible to the RF energy emitted by the mobile radio
antenna, and if any measures need to be implemented to eliminate or
mitigate the potential for EMI between the radio transmitter and the
electronic equipment.

To avoid possible interference between the radio transmitter and any vehicle
electronic control modules, such as ABS, engine, or transmission control modules,
your mobile radio should be installed only by an experienced installer, using the
following precautions when installing the radio:

1 Refer to the manufacturer’s instructions or other technical bulletins for

recommendations on radio installation.

2 Before installing the radio, determine the location of the vehicle electronic control

modules and their harnesses within the vehicle.

3 Route all radio wiring, including the antenna cable, as far away as possible from

the electronic control units and associated harnesses.

The following explains the operational warnings:

•

Refer to vehicle manufacturer’s manual prior to installation of electronic
equipment to avoid interference with air bag wiring.

•

DO NOT mount or place a mobile radio in the area over an air bag or in
the air bag deployment area. Air bags inflate with great force. If a radio
is placed in the air bag deployment area and the air bag inflates, the
radio may be propelled with great force and cause serious injury to
occupants of the vehicle.

•

Use of a radio that is not intrinsically safe in a potentially explosive
atmosphere could result in a serious injury or death. You should only

4