VeriFone VX810-CTLS Benutzerhandbuch

V

X

810 I

NSTALLATION

 G

UIDE

The cable required junction box that provides a standard RJ-45 LAN socket and a 

DC jack. However, since most hosts do not support peer-to-peer LAN connection 
to a PIN pad, an additional RJ-45 socket is provided on the junction box to allow a 
direct connection between V

x

810 and the host.

Not all V

x

810 configurations and device contexts require the use of a power 

supply – VeriFone ships power supplies with the V

x

810 as required.

If you have changed the context in which the V

x

810 is used or have questions 

about which power supply should be used, contact your VeriFone representative.

Before connecting a power supply, disconnect the power pack cord from the 
power outlet.

Connect and route all cables between the V

x

810, ECR, and PC before plugging 

the power pack cord into a wall outlet or surge protector.

When the V

x

810 has power and an application is loaded, the application starts 

after the initial VeriFone copyright screen and displays a unique copyright screen. 
If no application is loaded, 

 appears on the display after the 

initial VeriFone copyright screen.

Using an incorrectly rated power supply can damage the unit or cause it not to 

work properly. Use only a power pack with VPN CPS11212-3A-(R) (see 

 for detailed power supply specifications).

Do not plug the power pack into an outdoor outlet or operate the V

x

810 outdoors. 

Also, disconnecting power during a transaction can cause transaction data files 
not yet stored in memory to be lost.

To protect against possible damage caused by lightning strikes and electrical 

surges, VeriFone recommends installing a power surge protector.