Authinx Inc. CM19A Benutzerhandbuch

CM19A-5/01

Right-click
on a label to
type in the
name of the
light or
appliance
this button
controls.

Click to
change the
Housecode setting
(set it to the same letter
as your TM751 and
X10 Modules).

Click to control X10
Modules set to 1 thru 8
or 9 thru 16.

Click to
turn X10
Module
on or off.

Then click
to dim or
brighten
Lamp or
Wall
Switch
Modules.

1. Set the TM751 Transceiver to Housecode A. Plug a lamp

or appliance into the TM751. Plug the TM751 into an AC
outlet (use one near your PC for now).

2. Download the X10

PalmPad software from:
www.x10.com/software.

3. Install the software as per

its instructions. At the
appropriate point you will
be instructed to plug in
the CM19A.

4. Plug the CM19A into your computer’s USB port.
5. Follow the instructions to complete the installation.
6. Run the X10 PalmPad application.
A picture of an X10 PalmPad remote appears on your
computer monitor. Use the on-screen remote control just like
a regular remote control: Click on 1 to test the Transceiver.
For more information right-click the PalmPad to access the
extensive on-line help.  You can also print labels from here to
match those on the on-screen PalmPad remote and place them
on a physical PalmPad (sold separately). You can also turn on
or off sound effects that occur when you press buttons.
Persons with physical disabilities who have software that can
access their keyboard can simply “type” A 1 ON, for example,
to turn on any X10 Module or wireless camera.

Wireless  Computer Interface/Transceiver

● Controls up to 256 lights, appliances, and/or cameras instantly from your PC, by remote control.
● Works with the TM751 Transceiver and X10 Modules (sold separately).
● Works with X10’s PalmPad software (available from www.x10.com/software).
● Connects to your PC’s USB port for easy installation.
● Up to 50 ft. range.

Model  CM19A

The CM19A Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to a TM751 Transceiver.
The  Transceiver then passes the signals onto your house wiring to control lights, appliances, and/or X10 wireless
cameras around your home. You plug lights and appliances into X10 Modules (sold separately). The CM19A is also
a wireless receiver so you can tell your PC, from any X10 remote control, what cameras you want it to control.

F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART
15  OF THE  FCC  RULES.  OPERATION  IS  SUBJECT TO THE
FOLLOWING TWO  CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.

NOTE: NO CHANGES OR MODIFICATIONS MAY BE
MADE TO THE UNITS.  ANY CHANGES MADE TO THE
UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE
THE EQUIPMENT.

LIMITED 1-YEAR WARRANTY
X10.com, a divisions of X10 Wireless Technology, Inc. (X10)
warrants X10 products to be free from defective material and
workmanship for a period of one (1) year from the original date of
purchase at retail. X10 agrees to repair or replace, at it’s sole
discretion, a defective X10 product if returned to X10 within the
warranty period and with proof of purchase.
If service is required under this warranty:
1. Call 1-800-675-3044 or e-mail sales@x10.com for details on

how to return your unit(s).

2. Enclose a check for $4.00 for postage and handling.
3. Enclose a dated proof of purchase.
4. X10 is not responsible for shipping damage.

Units to be returned should be packed carefully.

5. For additional warranty information, contact X10.