Authinx Inc. UR19A Benutzerhandbuch

If you have purchased and installed a
Transceiver Module, you can control it
and other X10 modules as follows:

1. Press and release

the X10 button.

1. Press and release

the X10 button.

2. Press and hold

TIMER until the LED
indicator lights
steadily. Release
the TIMER button.

2. Use the number

buttons to enter the
Unit Code number
of the chosen
module. (You do
not need to enter
‘0’ first for a single
digit number.)

3. Press the appro-

priate button for the
function you require
(see below).

On:

CHANNEL +

Off:

CHANNEL –

Bright:

VOLUME +

Dim:

VOLUME –

All Lamps On:

POWER

All Modules Off:

MUTE

Note: You cannot dim or brighten an
Appliance Module. If the module was off
and you press Bright or Dim (VOLUME+
or VOLUME-) this will simply turn the
module on.

The X10 Sleep Timer switches off the
chosen modules after the preset time.

1. Press and hold

TIMER until the LED
indicator lights
steadily. Release
the TIMER button.

2. Use the number

buttons to enter the
sleep time required
(1 to 99 minutes).

3. Press ENTER to

confirm the setting.

Note: Take care to leave the remote
pointing at the TV to ensure it turns off the
TV at the time you set.

The Sleep Timer automatically turns off
the TV after the time you set. Press the TV
button, then follow the instructions below
to set the Sleep Timer: