UTC Fire & Security Americas Corporation Inc 844-PIR Benutzerhandbuch
)
1
,QVWDOODWLRQ,QVWUXFWLRQV
ZZZJHVHFXULW\FRP
*(6HFXULW\
Product
Summary
Summary
A motion sensor (passive-infrared or PIR) detects movement by sensing the infrared energy
emitted from a body as it moves across its field of view. When this motion is detected, the sensor
transmits an alarm signal.
emitted from a body as it moves across its field of view. When this motion is detected, the sensor
transmits an alarm signal.
Install motion sensors to protect areas where door/window sensors are impractical or not needed.
For example, use a motion sensor to protect large areas or open floor plans. Motion sensors can
also provide backup protection in areas where door/window sensors exist.
For example, use a motion sensor to protect large areas or open floor plans. Motion sensors can
also provide backup protection in areas where door/window sensors exist.
This wireless motion sensor includes the following features:
•
Field-selectable coverage area; 33 or 50 feet
•
Field-selectable sensitivity modes; 2-pulse or 4-pulse
•
135-second transmitter lockout time after an alarm that helps extend battery life
•
Cover-activated tamper
•
Supervisory signal transmitted every 64 minutes to the control panel
•
Sensor low battery reports (trouble) to the control panel
Included with the sensor is a thin cardboard undercrawl mask and snap-in plastic masks
(installed at the factory). Self-adhesive masking strips are also included.
(installed at the factory). Self-adhesive masking strips are also included.
Installation
•
If possible, locate sensors within 100 feet of the panel. While a transmitter may have an
open-air range of 500 feet or more, the installation site can have a significant effect on trans-
mitter range. Changing the sensor location may help overcome adverse wireless conditions.
open-air range of 500 feet or more, the installation site can have a significant effect on trans-
mitter range. Changing the sensor location may help overcome adverse wireless conditions.
•
Mount the sensor permanently on a flat wall or in a corner. Do not set it on a shelf.
•
For installations without pets, the required mounting height is 7 1/2 feet.
•
Mount the motion sensor on an insulated, outside wall facing in.
•
Mount the motion sensor on a rigid surface which is free from vibrations.
•
Position the sensor so it faces a solid reference point, like a wall.
•
Do not aim the sensor at windows, fireplaces, air conditioners, heaters/heating vents, or place
it in direct sunlight.
it in direct sunlight.
•
Position the sensor to protect an area where intruders are most likely to walk across the
detection pattern (see Figure 1).
detection pattern (see Figure 1).
Figure 1. Overhead (Bird’s Eye View) Detection Path
Person walking across detection path.
'RFXPHQW1XPEHU;;5HY
6HSWHPEHU
35(/,0,1$5<
Preliminary 9/1/04
6HQWURO$3::LUHOHVV3,5
0RWLRQ6HQVRU
Model No.
60-991-900