Nihon Kohden Corporation ZM-520PA Benutzerhandbuch

Operator’s Manual ZM-520PA/521PA/530PA/531PA

6. Use with other equipment:

When the equipment and/or system is adjacent to or stacked with other
equipment, the equipment and/or system may affect the other equipment. Before
use, check that the equipment and/or system operates normally with the other
equipment.

7. Use of unspeciﬁed accessory, transducer and/or cable:

When an unspeciﬁed accessory, transducer and/or cable is connected to this
equipment and/or system, it may cause increased electromagnetic emission
or decreased electromagnetic immunity. The speciﬁed conﬁguration of this
equipment and/or system complies with the electromagnetic requirements with
the speciﬁed conﬁguration. Only use this equipment and/or system with the
speciﬁed conﬁguration.

8. Use of unspeciﬁed conﬁguration:

When the equipment and/or system is used with the unspeciﬁed system
conﬁguration different than the conﬁguration of EMC testing, it may cause
increased electromagnetic emission or decreased electromagnetic immunity.

Only use this equipment and/or system with the speciﬁed conﬁguration.

9. Measurement with excessive sensitivity:

The equipment and/or system is designed to measure bioelectrical signals with
a speciﬁed sensitivity. If the equipment and/or system is used with excessive
sensitivity, artifact may appear by electromagnetic interference and this may
cause mis-diagnosis. When unexpected artifact appears, inspect the surrounding
electromagnetic conditions and remove this artifact source.

If the above suggested remedial actions do not solve the problem, consult your
Nihon Kohden representative for additional suggestions.

૞ᚑ 㒙ጊޓᖘᏆ

ᛚ⹺ ⌀ᨩޓ⌬