Nihon Kohden Corporation ZM-520PA Benutzerhandbuch

44 

Operator’s Manual  ZM-520PA/521PA/530PA/531PA

Refer to the electrode operator’s manual for details.

1.  Carefully remove the backing paper from the 

electrode. Avoid touching the adhesive surface.

2.  Place the electrode on the previously cleaned skin. Pay 

attention to the electrode lead color and symbol.

3.  Clip the electrode lead to the electrode.

4.  Fasten the electrode lead wire with surgical tape 

with an extra length of wire between the tape and the 
electrode. This lessens the movement of electrode 
leads by body movement and helps stable monitoring.

After attaching electrodes and connecting ECG leads, check that the electrodes are properly 
attached to the patient and the ECG waveform is acquired on the check electrodes screen. For 
details on the screen, refer to the “Screen Descriptions” section.

Select an appropriate probe for the patient.

Only use Nihon Kohden specified 
electrodes, electrode leads and SpO

2

 

probes. Otherwise, the maximum 
performance from the transmitter 
cannot be guaranteed.

Do not use a damaged or 
disassembled probe. It causes 
incorrect measurement and may injure 
the patient.

૞ᚑ 㒙ጊޓᖘᏆ

ᛚ⹺ ⌀ᨩޓ⌬