HP 5185-3843 Benutzerhandbuch
C-8 Specifications and Regulatory Statements
Exposure to Radio Frequency Radiation
Caution The radiated output power of this device is far below the FCC radio frequency
exposure limits. Nevertheless, the device shall be used in such a manner that the
potential for human contact during normal operation is minimized.
potential for human contact during normal operation is minimized.
The product and any attached external antenna, if supported, shall be placed in
such a manner to minimize the potential for human contact during normal
operation. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm (8
inches) during normal operation.
such a manner to minimize the potential for human contact during normal
operation. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm (8
inches) during normal operation.
Canada:
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations of the Canadian Depart-
ment of Communications. The internal wireless radio complies with RSS 210 of Industry
Canada.
digital apparatus as set out in the radio interference regulations of the Canadian Depart-
ment of Communications. The internal wireless radio complies with RSS 210 of Industry
Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par le Ministère des Communications du Canada. Le
composant RF interne est conforme à la norme CNR-210 d’Industrie Canada.
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par le Ministère des Communications du Canada. Le
composant RF interne est conforme à la norme CNR-210 d’Industrie Canada.
Australia:
This equipment complies with Australian EMC requirements.