HP HNI06CWR2 Benutzerhandbuch

This chapter provides country- and region-specific non-wireless and wireless regulatory notices and 
compliance information for the computer product. Some of these notices may not apply to your product.

One or more integrated wireless devices may be installed. In some environments, the use of wireless devices 
may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous 
locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for 
authorization to use it before you turn it on.

Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be 
physically located on the bottom of the computer, inside the battery bay (select models only), under the 
removable service door (select models only), on the back of the display, or on the wireless or modem module.

Some products may also provide electronic regulatory labels (e-labels) for radio modules in your computer. 
Electronic labels can be accessed through the system BIOS.

Electronic labels are not available on all products.

Devices not for sale or use in the United States may not contain a FCC ID. 

To view electronic regulatory labels:

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup Menu” 

message is displayed at the bottom of the screen.

Press 

f10

 to enter Computer Setup.

Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press 

enter

.

To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and 
then press OK.

The list of available electronic label items varies depending on the computer model and 

installed devices.

To exit Computer Setup menus without saving your changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select Main, select Ignore Changes and Exit, and then press 

enter

.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular 
installation.

Accessing regulatory labels

1