Apple A1254 Benutzerhandbuch
28
Chapter 4
Tips and Troubleshooting
To return AirPort Extreme to the factory settings:
m
Use the end of a straightened paper clip to press and hold the reset button until the
status light flashes quickly (about 5 seconds).
AirPort Extreme resets with the following settings:
 AirPort Extreme receives its IP address using DHCP.
 The network name reverts to Apple Network XXXXXX (where XXXXXX is replaced
with the last six digits of the AirPort ID).
 The base station password returns to public.
If your base station is still not responding, try the following:
1
Unplug AirPort Extreme.
2
Use the end of a straightened paper clip to press and hold the reset button while you
plug in AirPort Extreme.
Your AirPort Extreme Status Light Flashes Amber
The Ethernet cable may not be connected properly, AirPort Extreme may be out of
range of an AirPort network, or there may be a problem with your Internet service
provider. If you are connected to the Internet with a DSL or cable modem, the modem
may have lost its connection to the network or the Internet. Even if the modem seems
to be working properly, try disconnecting the modem from its power supply, waiting a
few seconds, and then reconnecting it. Make sure AirPort Extreme is connected directly
to the modem via Ethernet before reconnecting power to the modem.