Andrew Wireless Innovations Group BCEL-400 Benutzerhandbuch

 

  

 

The company has a policy of continuous product development and improvement and we therefore 

reserve  the right to vary any information quoted without prior notice. 

 

 
This section describes the TPR family (19” Sub rack). The TPR is part of the 

Britecell system and host all plug-in modules such as TFL-card, TLC 
splitter/combiner, TFL-BSI Base Station Interface and control modules. 
A TPR sub-rack, when fully equipped, can support up to 6 TFL Local Units, one 2-
way splitter-combiner, two 3-way splitter-combiners, one Base Station Interface, 
and one control module. Therefore this complete configuration supports up to 24 

TFA Remote Units and up to 48 antennas. 
 

 

 
 

 
Local  interfaces  may  not  be  placed  next  to  each  other;  one  7te 

module is always required between them. 
TFL local interface cards can only be fitted in slots 1, 3, 5, 7, 9, 

and 11 of the sub-rack, slot 1 being the left most one.  
 
9

 

WARNING: any slot capable of accepting an TFL that is 

unused must be fitted with a dummy plug to avoid alarms 

being generated (see Fig. 23) 

9

 

WARNING: do not remove or insert any module into TPR 

subrack, without switching the power supply off.