TAIWAN SHIN-KONG SECURITY CO. LTD. SGW1 Benutzerhandbuch
英文說明書
See pages below for settings and setup steps
Part 1
Part 1
Shinbobo connection setup
Press to power on
Part 2
WiFi setup
Software installation
Connect to the Google Play/App
Store, search for app Shinbobo,
then download and install it.
Connect to the Google Play/App
Store, search for app Shinbobo,
then download and install it.
Enable the WiFi search function
on your smartphone, search for
WiFi AP Shinbobo_xxxxxx and
connect to it with default
password “12345678”
on your smartphone, search for
WiFi AP Shinbobo_xxxxxx and
connect to it with default
password “12345678”
Open this smartphone app, and
select “add new device”.
select “add new device”.
Run App
Select device setup option
1. Select options at upper right
corner of desired page
2. Select setup option.
Select device setup option
1. Select options at upper right
corner of desired page
2. Select setup option.
Search for WiFi AP
Select wireless network dropdown
menu in device setup page.
Select wireless network dropdown
menu in device setup page.
Selection field WiFi AP
Type in password and complete
the setup work.
Type in password and complete
the setup work.
Use smartphone app to scan QR
code (UID) at bottom of your
Shinbobo, do required setup after
it is identified successfully.
code (UID) at bottom of your
Shinbobo, do required setup after
it is identified successfully.
In your first device operation
Check password: admin (default)
to enable it for running the
Shinbobo robot
Check password: admin (default)
to enable it for running the
Shinbobo robot
Your Shinbobo is now set. Follow steps
below to verify its connect with the Internet.
1. Remove connection settings of your
1. Remove connection settings of your
Shinbobo WiFi AP (Shinbobo_xxxxxx) from
your smartphone WiFi settings to ensure
your smartphone is able to connect the
Internet.
2. Connect your smartphone to external
WiFi or 3G/4G network.
3. Open smartphone App. If the Camera
2. Connect your smartphone to external
WiFi or 3G/4G network.
3. Open smartphone App. If the Camera
page displays then the setup work is done
successfully.
*
For further information on your product, web
operation interface, and other advanced
settings, please connect to our official web
site at http://www.sks.com.tw/Shinbobo.
Precautions
Note
Use your Shinbobo at location with WiFi AP
DO NOT move your Shinbobo by holding at its head to prevent damage to it.
Your Shinbobo is protected from splashing only. DO NOT immerse it in water or it may
get damaged.
Maximum wireless transmission speed varies with network environment.
Please use your Shinbobo on flat floor indoor.
DO NOT fall your Shinbobo to ground as it may get damaged.
Your Shinbobo is designed for indoor use. Color of its surface may get biased due to
insufficient ambient light or outdoor environment.
Your Shinbobo is compliant with the Administrative Regulations on Low Power Radio
Waves Radiated Devices:
Article 12:
Without permission granted by the NCC, any company, enterprise, or user is not
allowed to change frequency, enhance transmitting power, or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article 14:
The low power radio-frequency devices shall not influence aircraft security and
interfere legal communications. If found, the user shall cease operating immediately
until no interference is achieved.
Said legal communications means radio communications is operated in compliance
with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from
legal communications or ISM radio wave radiated devices.
Precautions
Use your Shinbobo at location with WiFi AP
DO NOT move your Shinbobo by holding at its head to prevent damage to it.
Your Shinbobo is protected from splashing only. DO NOT immerse it in water or
it may get damaged.
Maximum wireless transmission speed varies with network environment.
Please use your Shinbobo on flat floor indoor.
DO NOT fall your Shinbobo to ground as it may get damaged.
Your Shinbobo is designed for indoor use. Color of its surface may get biased
due to insufficient ambient light or outdoor environment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate the
equipment.
1.To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
2. This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter
DO NOT move your Shinbobo by holding at its head to prevent damage to it.
Your Shinbobo is protected from splashing only. DO NOT immerse it in water or
it may get damaged.
Maximum wireless transmission speed varies with network environment.
Please use your Shinbobo on flat floor indoor.
DO NOT fall your Shinbobo to ground as it may get damaged.
Your Shinbobo is designed for indoor use. Color of its surface may get biased
due to insufficient ambient light or outdoor environment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate the
equipment.
1.To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
2. This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter
Your Shinbobo is compliant with the Administrative Regulations on Low Power
Radio Waves Radiated Devices:
Article 12:
Without permission granted by the NCC, any company, enterprise, or user is not
allowed to change frequency, enhance transmitting power, or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article 14:
The low power radio-frequency devices shall not influence aircraft security and
interfere legal communications. If found, the user shall cease operating
immediately until no interference is achieved.
Said legal communications means radio communications is operated in
compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference
from legal communications or ISM radio wave radiated devices.
Radio Waves Radiated Devices:
Article 12:
Without permission granted by the NCC, any company, enterprise, or user is not
allowed to change frequency, enhance transmitting power, or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article 14:
The low power radio-frequency devices shall not influence aircraft security and
interfere legal communications. If found, the user shall cease operating
immediately until no interference is achieved.
Said legal communications means radio communications is operated in
compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference
from legal communications or ISM radio wave radiated devices.
Dealer stamp
This warranty card is valid only with dealer stamp
Model
Sold on
yyy
mm
App Store / Play store
Warranty card
Stepless elevation angle adjustment
Charging light
indicator
Reset switch
Micro USB port
Power switch
IR night vision supportive light
Mic/speaker
connector
Caster
Status light indicator
Package included
Shinbobo robot, Micro USB charging cable, operation manual (this manual),
warranty card
warranty card
Product specification
Model: SGW1
Dimension: L 103mm, W 96mm, H 158mm
Connection: IEEE802, 11b/g/n support
Video recording: instant image streaming to mobile device
(resolution: maximum up to 720P@18FPS)
Conversation: Shinbobo robot featuring duplex conversation microphone
Sensor: IR LED light compensation
Charging: Micro USB port
Battery: 2600mAh@3.7V, for up to 2 hours of recording and streaming
Mobile device App: Android V4.3 or later edition, iOS V8.0 or later edition
Dimension: L 103mm, W 96mm, H 158mm
Connection: IEEE802, 11b/g/n support
Video recording: instant image streaming to mobile device
(resolution: maximum up to 720P@18FPS)
Conversation: Shinbobo robot featuring duplex conversation microphone
Sensor: IR LED light compensation
Charging: Micro USB port
Battery: 2600mAh@3.7V, for up to 2 hours of recording and streaming
Mobile device App: Android V4.3 or later edition, iOS V8.0 or later edition
Flash at 5 second frequency: standby
(no connection with smartphone)
Flash at 1 second frequency: low battery
Light continuously: connected with smartphone and in
operation
(no connection with smartphone)
Flash at 1 second frequency: low battery
Light continuously: connected with smartphone and in
operation
Status light indicators
Yellow light
Power light indicators
Green light
Light continuously: charging in progress
Light off: battery fully charged
Light off: battery fully charged
Remote Mobile Monitoring
Remote Mobile Monitoring
Our warranty
Your Shinbobo is warranted for one year after the date of sale.
The battery of Shinbobo is warranted for half a year.
In case of any product failure under normal use in warranted period,
call our customer service center and return your Shinbobo along with
the warranted card to our service personnel for troubleshooting.
Please keep your warranty card properly. This company shall issue
another one in no cases.
What is not warranted
Product damage due to improper use or disassembled or modified by
you or any other one without permission from this company in
advance.
Product failure, damage, wear, paint off, or partial function loss due to
crashes in its use.
Failure or damage due to natural disasters, typhoons, fires, floods,
explosions, other accidents or other force majeure.
Failure or damage due to poor environment conditions or other causes
attributable to users.
1.
1.1
1.2
1.3
1.4
2.
2.1
2.2
2.3
2.4
Note: For services without warranty card or with
warranty expired or not covered by this warranty the
user may subject to extra maintenance charges.
Warranty period: One year after date of purchase
Taiwan Shin Kong Security Co., Ltd.
Customer service hot line: 0800-097-668
No. 128, Xingai Road, Neihu District, Taipei City
www.sks.com.tw
Taiwan Shin Kong Security Co., Ltd.
Head office: NO. 128, Xingai Road, Neihu District, Taipei City
Tel.: (02) 7719-9888
Fax: (02) 2796-8899
www.sks.com.tw
Customer service hot line: 0800-097-668
•
•
•
•
•
•
•
•
•
•
•
•
正
反
正
反