Volansys Technologies pvt ltd GW6UL01M2M4 Benutzerhandbuch

Seite von 25
Modular IoT Gateway User Manual
 
 
 
Rev0.4 
Confidential 
Copyright © 2016 Volansys
  
August 17, 2017 
Volansys Technologies 
Page | 
14
 
4.1  Memory, I/O Ports and external peripheral support 
4.1.1  DDR3 
  Modular IoT Gateway is equipped with 256 MB DDR3L Memory which is upgradable up to 1 GB. 
4.1.2  NAND Flash 
  Gateway is available with on-board NAND (1GB) flash. 
4.1.3  Micro SD Card Slot 
  Micro SD slot (J18) is provided on Modular IoT Gateway. 
  It is connected to USDHC1 interface of i.MX 6UltraLite on SoM Module. 
 
Figure 7 – Reference design Platform interface details
 
4.2  Ethernet Port 
Modular IoT Gateway incorporates a single full-featured 10/100 Ethernet interface, implemented with 
the i.MX6UL MAC-NET core in conjunction with a 10/100-Mbit/s MAC coupled with an on-board 10/100 
PHY.  
The modular IoT Gateway comes with following features: 
  Integrated PHY on SoM for 10/100 Mbps 
  Auto-negotiation support 
 
Programmable MAC address
 
4.3  USB Ports 
The USB interface block provides two High speed USB port, which supports USB ver. 2.0. Initially both the 
connectors  will  act  as  host.  User  can  configure  USB-2(J17)  port  as  device  also  by  modifying  jumpers 
setting. USB-1 (J16) will work as host only. 
Jumper setting for USB-2 port host and device mode are shown in below table: 
 
USB-2 HOST 
USB-2 DEVICE 
JUMPER 1 (J30) 
CLOSE 
OPEN 
JUMPER 2 (J29) 
OPEN 
CLOSE 
Table 4 - Gateway USB Configuration