Dongguan Xing Yue Electronic co. Ltd XO-9659 Benutzerhandbuch
Fabric Speaker with Wireless Charging
Instruction Manual
Instruction Manual
Speaker part:.
Specifications
1. Working voltage:3.4-4.2V
2. Charging power supply: DC5V/880mA (Battery Indicator LED is red
when charging. Turns off when fully charged).
3. Low power warning: When voltage is lower than 3.4V, two beeps will
sound and the battery indicator LED will flash blue.
Operation
Turn on speaker using the switch button located on the middle .
The LED indicator will flash in blue.
the device is in pairing mode.
A. Bluetooth mode – pairing with”
1. Working voltage:3.4-4.2V
2. Charging power supply: DC5V/880mA (Battery Indicator LED is red
when charging. Turns off when fully charged).
3. Low power warning: When voltage is lower than 3.4V, two beeps will
sound and the battery indicator LED will flash blue.
Operation
Turn on speaker using the switch button located on the middle .
The LED indicator will flash in blue.
the device is in pairing mode.
A. Bluetooth mode – pairing with”
Forward Speaker
”
1. The blue flashing LED indicates pairing mode. Once a connection with
media device has been established, the flash will slow, remaining blue.
2. “-” Button: Click to skip to decrease volume. Press and hold to previous track
media device has been established, the flash will slow, remaining blue.
2. “-” Button: Click to skip to decrease volume. Press and hold to previous track
3. “ ” Button: Click to pause/play music, answer incoming calls.
4. “+” Button: Click to skip to increase volume. Press and hold to next track.
Charging thespeaker:
Charging thespeaker:
Using a regulated USB adapter .Connect a USB cable to a USB adapter.
Usingthe
Micro-USB connector, connect the other end of the USB cable to the charging port
onthe speaker. Plug the USB adapter into theoutlet to begin charging.
The LED will light up inred while in charging, turns off when fully charged.
onthe speaker. Plug the USB adapter into theoutlet to begin charging.
The LED will light up inred while in charging, turns off when fully charged.
Wireless Charger part
.
Specifications:
Input: 5V/Max.2000mA
Output: 5V/750mA
Charging Efficiency: ≥70%
Interface: Micro USB port
Input: 5V/Max.2000mA
Output: 5V/750mA
Charging Efficiency: ≥70%
Interface: Micro USB port
Easy To Use
1. Connect the Micro-USB tip to the input port
1. Connect the Micro-USB tip to the input port
a.Connect the provided Micro-USB cable to the USB plug adapter.
b.Connect the Micro-USB tip to the input port on the product.
2.Charging Mobile Devices: