Snake Mobile Products Ltd. CAT Benutzerhandbuch
User Manual
Real Time tracker & alarm
Important, please attention:
This real time tracker & alarm was designed for home
and asset location and communication, our company
assumes no liability or responsibility for any behaviors
violate other individual’s privacy.
assumes no liability or responsibility for any behaviors
violate other individual’s privacy.
Due to external factors all GSM devices have position
error, so the position provide by this device just for
reference only.
reference only.
There may be delays caused by telecom operators at
certain circumstance. Our company doesn’t assume
liability for users’ personal and property safety
liability for users’ personal and property safety
Main Features:
GSM quad band network, GPS location
Website/IOS APP/Android APP/SMS ;multiple set and
tracking
tracking
Noise sensor &Vibration sensor alarm
Voice monitoring
Low battery alarm
SIM changing alarm
Long time standby
Product specification:
GSM network: 850/900/1800/1900MHz
GPRS standard: Class 12, TCP/IP
GPS locating time:
a)30sec with cold boot(under the open sky)
b)29sec with warm boot(under the open sky)
c) 5sec with hot boot (under the open sky)
b)29sec with warm boot(under the open sky)
c) 5sec with hot boot (under the open sky)
GPS Positioning accuracy: 10-15m(open sky)
Working temperature: -20
℃ ~ +70℃
Working humidity: 5% ~ 95% RH
Host size: 40x34 x14mm
Host weight: 24g
Accessories
1* Main Host
1* USB cable
1* User manual
1*12V to 5V power supplier
1*Car charger
1* USB cable
1* User manual
1*12V to 5V power supplier
1*Car charger
Product View:
Function
Function
1
Lanyard hole
2
Reset hole
3
Switch button
4
Charger hole
5
GSM indicator
6
GPS indicator
7
SIM slot
8
Slot rubber plug
9
Microphone hole
Step 1: Prepare for work:
Please choose GSM network-based Micro-SIM card
(same as Iphone4) for the product. And please note:
(same as Iphone4) for the product. And please note:
Please be sure the tracker is turn off before insert or
take out the Micro-SIM.
Please be sure the GPRS and Caller ID has been
activated
Step 2: Power on
Press power button 3 second, when indicator flash it
means power on, when indicator light flash fast
means power on, when indicator light flash fast
， it show
the tracker search network successfully .
Step3: APP binding and function setting:
1. Scan the User manual cover QR code or search the
anytracking
in App store & Google play store to install the
App.
2. Enter the ID number and password to login, the default
password is 123456.
3. Confirm the device online, the corresponding
instruction set can be achieved.
4. APP function introduction
2. Enter the ID number and password to login, the default
password is 123456.
3. Confirm the device online, the corresponding
instruction set can be achieved.
4. APP function introduction
Real-time tracking:
show the last position and trace.
Historical route:
display the historical.
Geo-fence:
set and display Geo-fence area, when the
device gets into or get out the Geo-fence then it will send
an alert SMS.
an alert SMS.
Command setting
Device info:
check and mark the device information.
Change password:
change the App and web login
password.
SOS1 phone number:
the master phone number, used
to send command and receive alarm.
White list number:
Those white list number calls the
device SIM number, it will be allowed to remote listening.
Arm/Disarm:
open or
close related sensor alarm
function. there are 2
sensor ,it can work at the
same time;
a) Vibration sensor: when
function. there are 2
sensor ,it can work at the
same time;
a) Vibration sensor: when
the device detects
trembled, it will
alarm.
trembled, it will
alarm.
b) Noise sensor: when the
device detects the
noise, it will alarm.
Please use the noise
sensor alarm in quite
noise, it will alarm.
Please use the noise
sensor alarm in quite
area to reduce the false alert.
Alarm mode:
a)Alert to APP: only through the APP alarm. You can't
receive alarm notification if you don't login.(Only GPRS
fee, no other charge)
b)Alert to SMS,phone and APP: The device will send SMS
and APP alert first and then make call notification(it will
charge calling and SMS fee)
c) Alert to phone and APP: The device will call you and
send APP notification(Call charges )
d)Alert to SMS and APP: The device will send SMS and
APP alert(SMS charge)
receive alarm notification if you don't login.(Only GPRS
fee, no other charge)
b)Alert to SMS,phone and APP: The device will send SMS
and APP alert first and then make call notification(it will
charge calling and SMS fee)
c) Alert to phone and APP: The device will call you and
send APP notification(Call charges )
d)Alert to SMS and APP: The device will send SMS and
APP alert(SMS charge)
Language of SMS
：
Choose SMS language, the device provide three
languages: Chinese, English and French
languages: Chinese, English and French
Time zones
：
This is for App time, the factory default is UTC+08:00;
users can set it according to local time zone.
users can set it according to local time zone.
Device message:
display the alert list.
Alarm setting:
get the remind via APP when alarm
Logout:
logout the APP, and never get the alarm
remind via APP
Please log on
to learn more details of
APP and platform
Real-time call
SOS ask for help: press the S button for 5 sec then the
sos1 phone numbers will receive SMS messages like: SOS!
Link to my current location: http://... After that, the
tracker will call all the SOS phone numbers twice by turns.
sos1 phone numbers will receive SMS messages like: SOS!
Link to my current location: http://... After that, the
tracker will call all the SOS phone numbers twice by turns.
All functions also can set by SMS command
All command use in lowercase letters, without any
blank space and ending by #.
Command for setting master number:
password,sos1,phone number#
For example:123456,sos1,180********#
The tracker will reply: 180******** has been set for
the master number successfully.
Note: All SMS setting must send via SOS1
number.
blank space and ending by #.
Command for setting master number:
password,sos1,phone number#
For example:123456,sos1,180********#
The tracker will reply: 180******** has been set for
the master number successfully.
Note: All SMS setting must send via SOS1
number.
Remark:
1.
The tracker will boot automatically when it was
charging. Please put the tracker in network signal better
position when use.
2. The new machines need to be recharged for 2-3 hours
before use in order to achieve the best results.
3. Standby time:
1) Upload location data every 10 minutes, the standby
time is about 72 hours, talking time is 5-8 hours (Actual
test)
2) Close the real time tracking function, it can be standby
280hours (about 12days)
Note: Above test data is under the status of strong GSM
network
4. Please charging and boot with SIM card, the device
will automatically reboot when it can’t search GSM
network.
5. This product is not waterproof, please pay attention
when using.
position when use.
2. The new machines need to be recharged for 2-3 hours
before use in order to achieve the best results.
3. Standby time:
1) Upload location data every 10 minutes, the standby
time is about 72 hours, talking time is 5-8 hours (Actual
test)
2) Close the real time tracking function, it can be standby
280hours (about 12days)
Note: Above test data is under the status of strong GSM
network
4. Please charging and boot with SIM card, the device
will automatically reboot when it can’t search GSM
network.
5. This product is not waterproof, please pay attention
when using.
FAQ
Q: After inserting a SIM card, it can make a call,
but it display not enable on the platform and APP?
A: Please check that SIM Card has activated GPRS data
plan.
but it display not enable on the platform and APP?
A: Please check that SIM Card has activated GPRS data
plan.
Q: When I make call to the device from white list
number, why it is not auto-answer my call?
A: Please check that SIM Card has activated caller ID.
number, why it is not auto-answer my call?
A: Please check that SIM Card has activated caller ID.
Q: Device show online, but it shows “wait for the
device responses” when you set instruction with
APP.
A: a. Device signal is not good, so not smooth result of
GPRS
b. Device is busy.
device responses” when you set instruction with
APP.
A: a. Device signal is not good, so not smooth result of
GPRS
b. Device is busy.
Q: The SIM card has activated GPRS data plan, but
the device still not online.
The tracker have pre-program all most APN, maybe the
APN of the SIM card you use don’t preset in the tracker,
please find the apndata from the SIM card company ,then
send command to add the apn data into the tracker.
The command is: apn,apndata#
the device still not online.
The tracker have pre-program all most APN, maybe the
APN of the SIM card you use don’t preset in the tracker,
please find the apndata from the SIM card company ,then
send command to add the apn data into the tracker.
The command is: apn,apndata#
Q: Why is the RF – V8 radiation would be so low?
A: For the children's health, V8 reduced the GSM antenna
power; power is proportional to the radiation, the greater
power the higher radiation. General phone power is 33 db,
is the biggest power of V8 is 27 db, radiation
double every 2 db , so when the mobile phone have a cell
signal V8 might not have signal.
A: For the children's health, V8 reduced the GSM antenna
power; power is proportional to the radiation, the greater
power the higher radiation. General phone power is 33 db,
is the biggest power of V8 is 27 db, radiation
double every 2 db , so when the mobile phone have a cell
signal V8 might not have signal.
Q: I sent dw# command to V8, the device send me
tracking after 1-2 minutes, why so slowly?
A: because the V8 is GPS device, it’s only to start the GPS
after receiving the order, so it need a little long time.
tracking after 1-2 minutes, why so slowly?
A: because the V8 is GPS device, it’s only to start the GPS
after receiving the order, so it need a little long time.
Command for SMS setting
Command
Function
password,so
s1,phone
number#
Set master-control phone number
sos2(3,4,5),
phone
number#
Set sos2(3,4,5) phone number
gon#
Turn on real time tracking function
goff#
Turn off real time tracking function.
von,digital#
Turn on the vibrating sensor burglar
alarm( level 1 is the most sensitive and level
4 is the least sensitive)
4 is the least sensitive)
voff#
Turn off the vibrating sensor burglar alarm
non#
Turn on the sound sensor burglar alarm
noff#
Turn off the sound sensor burglar alarm
ntim,digital#
Set the sound sensor burglar alarm lasting
time
mod,digital#
Set the method of burglar alarm,1phone
calls&messages,2only phone calls,3only
messages
dw#
Inquiry positioning by SMS message
dsp#
Inquiry tracker’s situation
lag,1#
Change the language to Chinese(factory
default)
lag,2#
Change the language to English
lag,3#
Change the language to French
lon#
Turn on the indicator light(factory default)
loff#
Turn off the indicator light
Password,t,p
assword#
Change the password, the factory default
password is 123456