Altis Technology Ltd. B150 Benutzerhandbuch
User guide
Product Name:
Speaker
Model Name : B150
1. Unscrew the Bluetooth module by turning counterclockwise (Pic 1 & 2). Take
1. Unscrew the Bluetooth module by turning counterclockwise (Pic 1 & 2). Take
out the battery holder andinsert 4 AA alkaline or rechargeable batteries (Pic 3 &
4).
4).
2. Position batteries according to polarity marking (Pic. 1) , and screw the
Bluetooth module by turning clockwise (Pic 2).
3. To turn the Flashlight on, pull the globe and press the “M” button, the flashlight
will always turn on at the brightest setting with the lantern mode. Hold the “M”
button down can dim or brighten. The light will flash twice at the lowest /
brightest level.
button down can dim or brighten. The light will flash twice at the lowest /
brightest level.
4. To enable flashlight mode, collapse the globe.
5. Press and hold the “ON/OFF” button for 2 to 3 seconds to switch on the
Bluetooth module. The Bluetooth module will poweron (Bluetooth name: B150)
Voice reminder after the Bluetooth being activated:
1. When the Bluetooth module is on, voice indicator will say“Hello, This
system is ON. Enter pairing mode”.
2. When pairing is completed, the voice indicator will say “Connected”.
3. When it is disconnected, the voice indicator will say “Disconnected, Enter
pairing mode”.
4. When the Bluetooth cannot be connected successfully, the voice indicator
will say “Enter pairing mode”.
5. Press and hold the “ON/OFF” button again to switch off the Bluetooth
module, the voice indicator will say “Bye Bye”.
6. When the battery is low, the voice indicator will say “Low Battery”.
If the Bluetooth module did not pair with any devices, the voice indicator will
say “Enter pairing mode” every 3 minutes until the module is paired.
If the Bluetooth module cannot pair with any devices within 15 minutes, the
voice indicator will say “Bye Bye” and switch off the unit automatically.
1. When the Bluetooth module is on, voice indicator will say“Hello, This
system is ON. Enter pairing mode”.
2. When pairing is completed, the voice indicator will say “Connected”.
3. When it is disconnected, the voice indicator will say “Disconnected, Enter
pairing mode”.
4. When the Bluetooth cannot be connected successfully, the voice indicator
will say “Enter pairing mode”.
5. Press and hold the “ON/OFF” button again to switch off the Bluetooth
module, the voice indicator will say “Bye Bye”.
6. When the battery is low, the voice indicator will say “Low Battery”.
If the Bluetooth module did not pair with any devices, the voice indicator will
say “Enter pairing mode” every 3 minutes until the module is paired.
If the Bluetooth module cannot pair with any devices within 15 minutes, the
voice indicator will say “Bye Bye” and switch off the unit automatically.
6. To disconnect the Bluetooth connection by holding the “ON/OFF” button for 2
seconds.
7. When the Flashlight / Bluetooth at low battery level, the voice indicator will
say “Low Battery” to remind the unit needs to be re‐charged.
8. To remove the USB charger cover and connect with the USB cable to charge
the unit. The unit is charging if the green / red light flashing alternatively. For
example, it will take around 7 hours to fully re‐charge a 1300mAh and the
green light is on when the unit is being fully charged.
example, it will take around 7 hours to fully re‐charge a 1300mAh and the
green light is on when the unit is being fully charged.