Shanghai MOONS' Automation Control Co. Ltd. MSDK61XX Benutzerhandbuch
39
PART 2: Software Configurations | Shanghai Moons' Automation Control Co., Ltd.
Add Luminaire to Scene Group
【Location】system settings—Scene Config —
【Operation 1】choose the Scene group, then click Lamp Group Config
【Operation 2】As is shown in Pic 46, left list is the luminaires controlled by
【Operation 2】As is shown in Pic 46, left list is the luminaires controlled by
Console 1, right list is Scene group, click arrow of left to right to add one lamp
to Scene group.
【Operation 3】Different luminaires controlled by different gateways can be
【Operation 3】Different luminaires controlled by different gateways can be
grouped in the same group by switching gateway.
【Operation 4】Click to finish operation.
【Operation 4】Click to finish operation.
Scene Value Config
【Location】system settings—Scene Config --
【Operation 1】you can configure Scene number and dimming value, each
Scene group has most 16 scenes
【Operation 2】here is an example: Scene 1 is 20%, Scene 2 is OFF
【Operation 3】we can add another Scene group named Rain. Set scene 1 as off,
【Operation 2】here is an example: Scene 1 is 20%, Scene 2 is OFF
【Operation 3】we can add another Scene group named Rain. Set scene 1 as off,
set scene 2 as 20%. The result is when you choose scene1 to broadcast, sunshine
group is dimmed to 20%, Rain group is off.
Pic 46 How to Finish Lamp Group Configuration
Pic 47&48 How to Finish Scene Dimming Value Setting