Hangzhou Ezviz Network Co. Ltd K2 Benutzerhandbuch

Seite von 6
Name
Description
LED Indicator
Flicker when any button is pressed.
Press to switch to Sleeping mode.
Press to switch to At-Home mode.
Press to switch to Leaving-Home mode.
Press to turn off the voice prompts.
K2 Introduction
Emergency
LED Indicator
At-Home Mode
Leaving-Home Mode
Sleeping Mode
Mute
K2 should be used cooperating with the Internet Alarm Hub. Refer to 
the Quick Start Guide of Internet Alarm Hub for detailed operation 
instructions.
Working temperature: -10°C to 55°C (14°F to 131°F)
Working humidity: 10% to 90% (non-condensing)
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL 
RIGHTS RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, 
images and all other information hereinafter are for description and explanation only. The 
information contained in the Manual is subject to change, without notice, due to firmware 
updates or other reasons. Please find the latest version in the                   ™ website 
(http://www.ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the 
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter 
referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) 
cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, 
without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision 
does not make any warranties, guarantees or representations, express or implied, regarding 
to the Manual.
Trademarks Acknowledgement
                     ™,        ™, and other Hikvision’s trademarks and logos are the properties of 
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the 
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, 
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS 
AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A 
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL 
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY 
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG 
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS 
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF 
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL 
HIKVISION’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE PURCHASE PRICE THE 
PRODUCT. 
HIKVISION does not undertake any liability for personal injury or property damage, as the 
result of product interruption or service termination cause by: a) improper installation or 
usage other than as requested; b) the protection of national or public interests; c) Force 
Majeure; d) yourself or the third party, including not limitation, using any third party’s 
products, software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE 
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR 
Regulatory Information
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked 
with "CE" and comply therefore with the applicable harmonized European 
standards listed under the Radio Equipment Directive 2014/53/EU, the EMC 
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be 
disposed of as unsorted municipal waste in the European Union. For proper 
recycling, return this product to your local supplier upon the purchase of 
equivalent new equipment, or dispose of it at designated collection points. 
For more information see: www.recyclethis.info. 
 
2006/66/EC and its amendment 2013/56/EU (battery directive): This product 
contains a battery that cannot be disposed of as unsorted municipal waste 
in the European Union. See the product documentation for specific battery 
information. The battery is marked with this symbol, which may include 
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper 
recycling, return the battery to your supplier or to a designated collection 
point. For more information see: www.recyclethis.info.
Bezeichnung Beschreibung
LED-Anzeige Blinkt, wenn eine Taste betätigt wird.
Drücken, um in den Nachtzeitmodus zu wechseln.
Drücken, um in den Anwesenheitsmodus zu wechseln.
Drücken, um in den Abwesenheitsmodus zu wechseln.
Drücken, um den Voice Guide zu deaktivieren.
K2-Einführung
Notfall
LED Anzeige
Anwesenheits-
modus
Abwesenheitsmodus
Nachtzeitmodus
Ton Aus
Die K2 sollte in Verbindung mit dem Internet-Alarm-Hub benutzt 
werden. Ausführliche Bedienungshinweise enthält die 
Schnellstartanleitung zum Internet-Alarm-Hub.
Temperatur (Betrieb): -10°C bis 55°C
Luftfeuchtigkeit (Betrieb) 10% bis 90% (nicht kondensierend)
Taste 2 Sekunden lang gedrückt halten, um einen Notalarm 
an die EZVIZ-Plattform zu senden.
Nombre
Descripción
Indicador LED
Parpadea cuando se pulsa cualquier botón.
Pulse para cambiar la Sueño.
Pulse para cambiar la modo En casa.
Pulse para cambiar la modo Fuera de casa.
Pulse el botón para desactivar los avisos de voz.
Introducción a K2
Emergencia
Indicador LED
Modo En casa
Modo Fuera de casa
Modo Sueño
Silencio
K2 debe utilizarse en colaboración con el centro de alarmas de 
Internet. Consulte la Guía de inicio rápido del centro de alarmas de 
Internet para obtener información detallada sobre su funcionamiento.
Temperatura de trabajo: De -10°C a 55°C (de 14°F a 131°F)
Humedad de trabajo: De 10% a 90% (sin condensación)
DEUTSCH
ESPAÑOL
Press and hold the button for 2 s to send an 
emergency alarm.
Mantenga pulsado el botón durante 2 s para enviar 
una alarma de emergencia a la plataforma EZVIZ.
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER 
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; 
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of illegal 
encroachment in certain area; however, the proper installation of the Products will not 
eliminate, but only reduce, that accidents will not occur or that there will be no personal 
injury or property loss as a result. You are highly recommended to raise your vigilance and 
strengthen the safety awareness in the daily life. 
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR 
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE 
CONFORMS TO THE APPLICABLE LAW. YOU FUTHER AGREE THAT THIS PRODUCT IS ONLY FOR 
CIVIL USE, AND HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS 
USED WITH ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT, 
MEDICAL TREATMENT, SAFETY EQUIPMENT OR OTHER SITUATIONS WHERE THE PRODUCT 
FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS 
DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY 
UNSAFE NUCLEAR ENERGY USES OR ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL 
RESPONSIBILITIES FOR LOSSES OR DAMAGES RESULTING FROM THE ABOVE USAGES 
WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE 
LATER PREVAILS. 
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF 
EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF 
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Safety Instruction
UD02089B-B
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment 
type [CS-K2-A] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Due to the product shape and dimension, the name and address of the 
importer/manufacturer are printed on the package.
SAVE THIS MANUAL FOR FUTURE REFERENCE