Shenzhen Funi Digital Technology Co. Ltd FN-VRC001 Benutzerhandbuch
Equipment starts, voice prompt to establish AP hotspots. Then open the
mobile wireless Settings. Find mv WiFi signal in the beginning, select and link
①
②
②
③
⑴Open WALN Settings and
select the wireless AP
select the wireless AP
⑵Open the phone client.
⑶Option in the top right corner of
the +. And select "add networked
device”
the +. And select "add networked
device”
2
④
⑤
⑥
⑷Click”LAN search” and find the
device from the device list.
device from the device list.
⑸Click "device configuration
" and then click "network settings"
to enter
" and then click "network settings"
to enter
⑹Select ”Station mode” , and
then select wifi signal in the
WALAN list and put password
then click “save”
then select wifi signal in the
WALAN list and put password
then click “save”
⑺When there’s voice prompt "wifi connected”, please connect your WIFI on your mobile phone to get
access to remote control(or in the pop-up window, click [yes])
access to remote control(or in the pop-up window, click [yes])
FAQ
1、Part of WIFI name and password has Chinese special fonts or special symbols, so the device
was configured successfully but the connection failedPlease change the WIFI name to English letters
or numbers.
2、In the process of configuration, the device prompts "connecting"but not succeed
（1）Check the router is 4G routing or not, the device does not support 5G routing、
（2）First of all, long press "Reset" till the device voice prompts to restore the factory settings,
and then short press "Reset" switch to AP mode,then use method2 to configure
（3）Check whether the DHCP service in the router settings is turned on,and whether the AP
isolation is turned off. Then set the wireless channel to 6 channels and then configure it.
( input 192.168.1.1 in the browser can check the router IP )
was configured successfully but the connection failedPlease change the WIFI name to English letters
or numbers.
2、In the process of configuration, the device prompts "connecting"but not succeed
（1）Check the router is 4G routing or not, the device does not support 5G routing、
（2）First of all, long press "Reset" till the device voice prompts to restore the factory settings,
and then short press "Reset" switch to AP mode,then use method2 to configure
（3）Check whether the DHCP service in the router settings is turned on,and whether the AP
isolation is turned off. Then set the wireless channel to 6 channels and then configure it.
( input 192.168.1.1 in the browser can check the router IP )
3
3、The device can be checked on the mobile phone, but, the computer client has prompted
video caching ?
video caching ?
(1)、Multiple routers can not be in the same LAN, if there are multiple routes, please modify
the two level router’s settings and make the two level routing LAN port IP is different from
the main router’s and also close the DHCP service, and then insert the cable into the LAN
port . The following figure:
the two level router’s settings and make the two level routing LAN port IP is different from
the main router’s and also close the DHCP service, and then insert the cable into the LAN
port . The following figure:
(２)、Check if the computer graphics card is installed, if not
installed, please download the “driver life” and install
(right click” my computer “- "device manager" ) , if there is
graphics card model number , means install successfully.
installed, please download the “driver life” and install
(right click” my computer “- "device manager" ) , if there is
graphics card model number , means install successfully.
4、Why can not receive the alarm picture?
(1)Alarm protection switch and alarm must be opened.
( device configuration - alarm settings)
(2)Push notifications must be turned on
(more features - push notifications)
(3)Mobile application rights must be open
(“setting” on mobile)
(1)Alarm protection switch and alarm must be opened.
( device configuration - alarm settings)
(2)Push notifications must be turned on
(more features - push notifications)
(3)Mobile application rights must be open
(“setting” on mobile)
(1)Alarm settings
(2)Push notification
4
(
3)Application information
(4)Application permissions
Connect power
APP Download
Connect Network
I O S
Android
Step 1: Download V380S APP on the mobile phone.
Step 2: Electrify the camera
Power interface
TF card slot
1
Reset / reset button
Interface:
User Manual
First of all, thank you for choosing our products,
please check all the attachments.
please check all the attachments.
Search “V380S” in the APP sore and install ,
or scan the QR code to install.
or scan the QR code to install.
Search “V380S”in the Android Store or mobile
assistant application and install,or scan the QR
code to install.
assistant application and install,or scan the QR
code to install.
Please read the user manual carefully before using and then keep it well.
Away from high temperature heat source and the environment; Avoid direct sunlight.
Pay attention to waterproof, water comes into contact with the equipment,
immediately without electricity;
immediately without electricity;
Avoid too damp environment use, please refer to the applicable scope of humidity
(85% RH applies in the following);
(85% RH applies in the following);
Dragon avoid use in extreme heat or cold environment, please refer to the
applicable temperature range (within a 10 degrees, + 50 degrees) is used;
applicable temperature range (within a 10 degrees, + 50 degrees) is used;
The machine should be installed horizontally or wall hanging and top loading,
avoid installed in place of violent vibration, do not put on the phone the
other equipment;
avoid installed in place of violent vibration, do not put on the phone the
other equipment;
Safety Cautions
The power supply voltage will be subject to the official standard (see power identity);
Insert the don't charged to pull on the memory card.
Select the playback time for playback
Video playback interface
Video playback
Serach the record files
DHCP server
Start address pool
ON
OFF
AUTO
192.168.1.100
End address pool
192.168.1.199
Ap isolation
ON
OFF
Wireless
ON
OFF
WIFI
Password
Channel
Wireless radio
V380S
123456789
6
√
LAN IP
IP
subnet mask
Manual
192.168.1.1
255.255.255.0
DHCP server
Start address pool
ON
OFF
AUTO
192.168.1.100
End address pool
192.168.1.199
network adapter
system device
display adapter
system device
display adapter