KPZ Inc. FLASH1 Benutzerhandbuch

56

This means that they have met test criteria and have rea
sonable fatigue life. It does not mean that the original com
ponents will last forever. They won’t.

Appendix C
Fastener Torque Specifications

Correct tightening torque of threaded fasteners is very 
important to yours safety. Always tighten fastener to the cor
rect torque. In case of a conflict between the instructions in 
this manual and information provided by a component manu
facturer, consult with your dealer or the manufacturer’s cus
tomer service representative for clarification. Bolts that are 
too tight can stretch and deform. Bolts that are too loose can 
move and fatigue. Either mistake can lead to a sudden failure 
of the bolt. Always use a correctly calibrated torque wrench 
to tighten critical fasteners on your bike. Carefully follow the 
torque wrench manufacturer’s instructions on the correct way 
to set and use the torque wrench for accurate results.

FASTENER RECOMMENDED TORQUE
REAR HUB WHEELS = 44Nm
PEDALS = 35Nm
SEATPOST CLAMP = 7-8Nm
SADDLE CLAMP = 17-25Nm
STEERER CLAMP = 8-9Nm
HANDLEBAR CLAMP = 7-8Nm
CONTROL LEVER CLAMPS = 6-8Nm