Shenzhen Home Smart Tech Co. Ltd PS-16-MA Benutzerhandbuch
SMART WIFI
PLUG MANUAL
Smart home plug
socket smart wifi
socket plug by
Ipad phone control
VOLTAGE
100-240V AC 50-60Hz
Max load current
10A
Total load must not exceed
2200w
Net work
802.11b/g/n
System
Above IOS6.0/Android2.3
Size
103L*63W*30H( mm )
1.Installation
1.1 Install App into samrt phone or tablet device.
1.2 Apple and Android users:search and install“eWeLink”
from APP STORE. Or scan the QR code,download and
install into samrt phone or tablet device.
2. Plug in
3. AP configuration
3.1 Press and hold Plugi ON/OFF button for 5 seconds
until repid flashing GREENER LED.
3.2 Go to your smart phone or tablet device setting.
3.3 Go Back and open the App”eWeLink”.
3.4 Tap“+j ”symbol
3.5 Tap ‘Next’ to comfirm device on pairing state.
3.6 Tap ‘Next’ to choose a Wifi for Device.
3.7 Waiting Pairing.
3.8 Plug will connect to the App.
3.3 Go Back and open the App”eWeLink”.
3.4 Tap“+j ”symbol
3.5 Tap ‘Next’ to comfirm device on pairing state.
3.6 Tap ‘Next’ to choose a Wifi for Device.
3.7 Waiting Pairing.
3.8 Plug will connect to the App.
4
4.1 If Plug fails to set up in your smart phone or
tablet device.
4.1.1 Unplug fromthepowerpoint.
4.1.2 Wait for 1 minute and repeat the above section
4.1.2 Wait for 1 minute and repeat the above section
3 steps again.
4.2 To add extra Plug onto your eWelink APP,please
repeat the above APPLE or ANDROID user steps.
4.3 Changing location,router or modem, please delete
device on the eWeLink,reset Plug in factory setting
and repeat the above APPLE or ANDROID user steps.
and repeat the above APPLE or ANDROID user steps.
01
02
Please connect your smart phone or tablet device to
the SAME router or modem with internet and Wi-Fi
access.
the SAME router or modem with internet and Wi-Fi
access.
5.1 Tap ‘Timer’ on the APP screen.
5.2 Tap ‘new timer ’ located top right hand corner, to
5.2 Tap ‘new timer ’ located top right hand corner, to
set 7days programmable ON/OFF timer function.
A maximum of 10 programmable timing function
can be set.
A maximum of 10 programmable timing function
can be set.
5.3 Tap ‘save’ when finish setting each programmble
timer function.
5.4 Tap ‘Countdown’ to set count down-On or count
down-OFF. To set count down-ON, please ensure
Plug is turn off(solidGREENLED)first.Tosetcount
down-OFF,please ensure Plug is turn on (solid BLUE
Plug is turn off(solidGREENLED)first.Tosetcount
down-OFF,please ensure Plug is turn on (solid BLUE
LED) first.
5.5 Tap ‘save’ when finish setting count down function.
You can only set timer and count down when your smart
phone or tablet device is connected to the SAME router
or modem with Plug.You can not set timer and count
down when you are outside the SAME router or modem
Wi-Fi network.
phone or tablet device is connected to the SAME router
or modem with Plug.You can not set timer and count
down when you are outside the SAME router or modem
Wi-Fi network.
Press and hold the ON/OFF button for 5 seconds until
you see a rapid flashing GREEN LED light,now Plug is
in factory setting mode.
you see a rapid flashing GREEN LED light,now Plug is
in factory setting mode.
Timing
6. Reset factory settings
5. Set timer and count down
Count down
03
04
IOS
Android
+