Dongguan Esmooth Acoustic Technology Co. Ltd. A2 Benutzerhandbuch

In order to have a proper and safe use of the headset, 

please read this user manual in detail and save it.

1. You should adjust the volume carefully when using the 

    headset to prevent hearing damage.

2. Please stop using the headset in potentially hazardous 

    situations to ensure your safety.

3. Please avoid using the headset to listen to music, make 

    or receive calls which may cause a distraction while driving.

4. Put this product and its accessories somewhere out of 

    the reach of children, to avoid a fatal danger caused by 

    inappropriate use.

5. You should keep water from entering the headset, which 

    may cause damage to the sound quality or the headset.

6. You should avoid turning the volume so high that you can’t 

    hear anything around you. If you feel a tinnitus or the volume

    is too high, please reduce the volume.

7. Stop using the headset if you feel obvious discomfort, 

    irritation or have other adverse reactions.

8. The headset should not be stored or used at temperatures

    below -15℃ (5 F) or above 55℃ (131 F) which may shorten 

    headset or battery life

1. Before charging, make sure the headset has been 

    switched off.

2. Plug USB cable into the charging port of headset; 

    plug the other side of USB cable into the USB charger 

    or other charging device. Charging will start and the 

    red light remains bright on the headset.

3. Charging time of headset takes approximately up to

    1.5-2hours, the red light will turn to blue when fully 

    charged.

2

3

4

5

6

7

Keep pressing the MF button until blue light blinks.

Keep pressing the MF button until blue and red lights 

blink alternatively

Turn off the Bluetooth function of your cell phone.

Or keep pressing the MF button until the red light goes 

out, to switch off the headset. 

Or take the headset from the cell phone to more than 

10m (30ft）away

When there is an incoming call, press the MF button once

to answer the call, or use your cell phone to answer it.

When there is an incoming call, double click MF button

to rejeck call, or use your cell phone to reject the call.

Press the MF button once or use your cell phone to hang 

up your call.

1. Keep the distance of the headset and cell phone (or other

    devices being connected) within 1 meter. The closer the 

    better.

2. Switch on the headset, and the headset will enter into 

    reconnection mode when the blue light blinks.

3. Switch on the Bluetooth search function in your cell phone

     or other devices being connected. Then the headset will

     automatically reconnect with the mobile phone which has

     connected last time

In standby mode, double-click the MF button to redial 

your last call. 

Bluetooth version: V4.1

Frequency range: 2.4GHz – 2.48GHz

Operating distance: up to 10M 

Standby time: up to 180hrs

Talking/music-playing time: about 8-9 hours

Charging time: about 2 hours

Frequency response: 20-22kHz

Operating Temperature:-10°C~50°C

Press MF button once to play/pause music.

Press Vol(+) and Vol(-) once to adjust volume; keep pressing 

the Vol(+) and Vol(-) to select previous track or next track.

 

1.X6P Headset cannot pair with Cell phone?

Ans: Please check whether your headset is in pairing mode or reconnection 

mode and check whether the Bluetooth function in your cell phone is on. Now 

check your device’s Bluetooth menu and delete/forget the headset and reconnect 

the headset again as before.

2.X6P headset cannot be switched on?

Ans: Please check the battery status of your headset.

3.Can I change the battery for the headset?

Ans: No, this headset use a built-in non-detachable Li-Polymer battery, it 

cannot be removed.

4.Can I use headset while driving?

Ans: For safety reason, we strongly recommend not to use over-ear headset 

to avoid distraction while driving.

5.X6P Headset has disconnected with your cell phone within 10 meters?

Ans: Please check if there is metal or other material within a relatively close range 

which may interfere with the Bluetooth connection. Bluetooth is a radio technology 

which is sensitive to objects between the headset and the connected device.

6. I cannot hear a sound from your computer or cell phone?

Ans: Please check whether the output channel of your computer is Bluetooth, that 

the Audio Device and Bluetooth function of your computer support A2DP profile. And 

please check that the volume on your headset/computer/cell phone is turned up.

7. I cannot use the headset to control the volume, to select a track or APP

   of my cell phone?

Ans: The Software settings of the APP may vary and lead to some functions 

of the APP not controlable by the headset.

Keep pressing the MF button until red light blinks and 

goes out.

Pair your headset with your cell phone：

1. Keep the distance between the headset and cell phone (or

    other devices being connected) within 1 meter. The closer 

    the better.

2. Keep pressing the MF button until the blue and red lights 

    blink alternatively.

3. Initiate Bluetooth function of cell phone (or other device being

    connected). Then “X6P” will be shown on your phone.

4. Select“X6P” (some cell phones need you to input the

    PIN “0000” as password) and the headset will automatically 

    connect with your cell phone, the blue light begins to blink.

    Attention: Generally, there is 120 seconds maximum to pair 

    the headset with your cell phone, or the Bluetooth pairing 

    mode will stop when the lights goes out. Please retry steps 

    1 to 4 to pair again if your operation doesn’t work.

Technical, specifications are subject to change without 

notice, we apologize for any inconvenience.

Warning: You must use the original cable to charge the Bluetooth 

headset, otherwise it may damage the headset. Thus, voltage of 

charger must be 5V, electric current exceed 100mA .

This headset uses a non-detachable built-in rechargeable battery, 

in order to prevent damage to the headset, please do not remove 

the battery.

X6P

USER MANUAL

Light

USB

Microphone

MF button

Vol(+) 

Next Track

Vol(-) 

Previous Track