Amroad Technology Inc. RF221 Benutzerhandbuch
RF MODULE Users Manal
trademark: amroad model: RF-221
The RFID part is an ISO 14443A RFID reader/writer, It’s operating in the 13.56MHz
ISM (Industrial Scientific Medicine) band for ISO 14443A RFID system.
The circuit is comprised of a Micro Controller unit(MCU), 13.56MHz RF Transceiver
circuit and a
ISM (Industrial Scientific Medicine) band for ISO 14443A RFID system.
The circuit is comprised of a Micro Controller unit(MCU), 13.56MHz RF Transceiver
circuit and a
LOOP Antenna.
Micro Controller Unit(MCU)
The Control circuit controls all of RFID ASIC signals.
Control circuit outputs the command data which is needed to work the Transceiver
circuit. When the response data from the RFID ASIC circuit, it will proceed
recognition and other procedure.
RF Transceiver circuit (RFID ASIC).
The signal of 13.56MHz is supplied from crystal oscillator.
The Magnetic field signal is generated by the Transceiver circuit.
This ASK modulation signal is supplied through the Impedance transformer and the
Antenna matching circuit to the external
The Control circuit controls all of RFID ASIC signals.
Control circuit outputs the command data which is needed to work the Transceiver
circuit. When the response data from the RFID ASIC circuit, it will proceed
recognition and other procedure.
RF Transceiver circuit (RFID ASIC).
The signal of 13.56MHz is supplied from crystal oscillator.
The Magnetic field signal is generated by the Transceiver circuit.
This ASK modulation signal is supplied through the Impedance transformer and the
Antenna matching circuit to the external
LOOP Antenna.
The feedback signal sent from the tag is received at the
LOOP Antenna
and is input to
The H.P.F. The signal is demodulated by the RF ASIC .
LOOP Antenna
The external
LOOP Antenna
is formed with the coil, and supplies the electric power
and the transmission signal to the tag by generating the flux of magnetic field
The product can only be installed in the device which the model name conforms to the
following wildcard characters : AABBBXR-YY-ZZ , and it must be installed by professionals. The
host end product must also pass the FCC Part 15 unintentional emission testing requirement
and be properly authorized per FCC Part 15.
The instruction for series models of DB3101R-FM-BA as below :
AABBBXR-YY-ZZ
A - Application
B - Number
X - Version
R - RFID
Y - Installation
Z - Color
For example : DB3101R-FM-BA