Shen Zhen DIVI Electronics.Co. LTD. A104 Benutzerhandbuch
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and
receiver.
3) Connect the equipment into an outlet on a circuit
3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
4) Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general
RF exposure requirement. The device can be used
in portable exposure condition without restriction.
RF exposure requirement. The device can be used
in portable exposure condition without restriction.
If the product is damaged or malfunctions
within 12 months from the date of purchase,
we will provide free maintenance service
after the technicist of our company
confirms that it was occurred in normal use.
Free maintenance are not available under the
following situations:
· No warranty card or product maintenance
label has been damaged.
· Self-disassembly causes damage.
· The product malfunctions because of water
drop, or man-made mechanical damage.
· Malfunction and damages caused by force
majeure or natural disasters.
In maintenance, the original card and commercial
invoice must be provided. If the user cannot
provide them, the free warranty is invalid.
Please follow the manual to use the product.
We are not responsible for the loss caused by
incorrect operations.
within 12 months from the date of purchase,
we will provide free maintenance service
after the technicist of our company
confirms that it was occurred in normal use.
Free maintenance are not available under the
following situations:
· No warranty card or product maintenance
label has been damaged.
· Self-disassembly causes damage.
· The product malfunctions because of water
drop, or man-made mechanical damage.
· Malfunction and damages caused by force
majeure or natural disasters.
In maintenance, the original card and commercial
invoice must be provided. If the user cannot
provide them, the free warranty is invalid.
Please follow the manual to use the product.
We are not responsible for the loss caused by
incorrect operations.
1 .
2.
3.
After-sales service and support
Warranty description ( The warranty scope is limited
to the speaker only, not including accessories
and gifts )
to the speaker only, not including accessories
and gifts )
1 .
2.
3.
4.
5.
4.
5.
6.
7 .
8.
9 .
9 .
10.
11.
12 .
13 .
13 .
Before you use the produt please read the manual
carefully and keep it properly.
Do not disassemble or refit the product by
yourself.
Keep the product away from heat source.
Do not place the product in humid conditions.
Keep water or other liquids away from the interior
of this product, or the prodact will break up.
Without playing for 5 minutes, the A104 will
shut-down automatically.
When the speaker is on, it will enter bluetooth
pairing status, searching and matching the
historical device automatically without Micro
SD card.
Please use a dry rag to across the product.
No flame should be placed around the item,
such as lit candles.
Please attention to the environment problem
when you dispose batteries.
This product can only be used between 0℃ ~
carefully and keep it properly.
Do not disassemble or refit the product by
yourself.
Keep the product away from heat source.
Do not place the product in humid conditions.
Keep water or other liquids away from the interior
of this product, or the prodact will break up.
Without playing for 5 minutes, the A104 will
shut-down automatically.
When the speaker is on, it will enter bluetooth
pairing status, searching and matching the
historical device automatically without Micro
SD card.
Please use a dry rag to across the product.
No flame should be placed around the item,
such as lit candles.
Please attention to the environment problem
when you dispose batteries.
This product can only be used between 0℃ ~
45℃ , Humidity in the air should be under 80%.
Please do not use a damaged power cable.
Please don't fix the speaker by yourself. This product
is not contain any user-serviceable parts.
Please don't fix the speaker by yourself. This product
is not contain any user-serviceable parts.
Steady on
Thanks for choosing DIVI. For ensuring our product
can bring you a fantastic using experience. Please
read both manuals of our product and your own
electronic equipments.
can bring you a fantastic using experience. Please
read both manuals of our product and your own
electronic equipments.
USB
Open the package and check whether the
following parts are complete :
A104Speaker x1/ USB Cable x1/ Specification x1
To enter the Photo-mode, press the power
button twice rapidly when the bluetooth is
connected. You will hear a beep sound, then
you can take the photo by pressing the power
button. The Photo-mode is available while the
music is playing.
The Direction of Key and Interface:
following parts are complete :
A104Speaker x1/ USB Cable x1/ Specification x1
To enter the Photo-mode, press the power
button twice rapidly when the bluetooth is
connected. You will hear a beep sound, then
you can take the photo by pressing the power
button. The Photo-mode is available while the
music is playing.
The Direction of Key and Interface:
1.
2.
3.
Attention
Connecting PC by USB cable, the speaker will install
the audio driver automatically which can achieve
both sync the data and play music. It could read
the SD card at the same time.
the audio driver automatically which can achieve
both sync the data and play music. It could read
the SD card at the same time.
PS : support Windows PC only
Indicator Status
Specifications
Steady on
Flash Slowly
Flash Slowly
Flash
Red Light
Blue Light
Charging
Fully Charged
Standby
Playing
Reading
Searching
Battery : 500mAh
Power : 3w
Response : 100Hz -18KHz SNR : S/N≥80dB
Size : Diameter 48×38.5mm
Last Time : 5hours
Charge Time : 2hours
The bluetooth Protocol : HS/HF,A2DP,AVRCP,OPP
Bluetooth Frequency Range : 2.4-2.48GHz
Weight : 137g
Size : Diameter 48×38.5mm
Last Time : 5hours
Charge Time : 2hours
The bluetooth Protocol : HS/HF,A2DP,AVRCP,OPP
Bluetooth Frequency Range : 2.4-2.48GHz
Weight : 137g
Double-clip to the photo model
warranty
period
保质期
Shenzhen DIVI Electronic Co.,Ltd
Tel: 0755-32817991
Web: www.divi.hk
Address: Longquan Science and Technology Park,
No. 19, Huaxing Road, New Longhua District,
Shenzhen, China
Made in China
Tel: 0755-32817991
Web: www.divi.hk
Address: Longquan Science and Technology Park,
No. 19, Huaxing Road, New Longhua District,
Shenzhen, China
Made in China
SLENDER WAIST
BLUETOOTH SPEAKER