SHENZHEN BAIJUNDA ELECTRONIC CO. LTD WD-213-5100QI Benutzerhandbuch

When phone align with charger base induction area, 4 indication led light up.

Type: Wireless Charger

Material: PC(Fireproof)

Color: Black/White/Grey/Gold

Size: L*W*H=108*108*7 MM

Input: DC 5V 2A; 9V 1.67A

Certificate: QI,FCC, RoHS, CE

Model No. : WD-213-5100QI

Model No.: WD-213-5100QI

Quick Wireless Charger

Model No.: WD-213-5100Q1

9.0V 1.67A

Input: 5.0V 2.0A

108mm

7mm

Power

input

White

is phone receving Area.2

dotted line

Phone Area.2

Black

is wireless transmitting Area.1

dotted line

Charger Area.1

Specifications:

Features:

Cautions:

Structure Diagram:

Phone and wireless charger base matching diagram

Welcome

to use Brightway wireless charger. It is suitable for office/home/travel and other

occasions

, with newly charging experience.

1. Super-thin, suitable for home, office, travel, on the go, with high efficiency, reliability;

with several protections, meet Qi standard.

2. Charge efficiency: Maximum conversion rate 85%

3. Working condition: Temperature from -10

℃ to 40℃, humidity 0%-90%RH, sea level

below 2000 meters.

4. Storage condition: Temperature from -40

℃ to 70℃, humidity 0%-90%RH, sea level

below 5000 meters.

5. Short circuit protection: Output circuit can be cut off immediately under the condition of

no-load, with load ( full-load) and recovered to work after removal of short circuit fault.

6. Over-load ( current) protection: with over-load protection, can be recovered to work

after removal of fault, over-current value range: 1.2-1.5 A.

7. Low- voltage protection: can automatically lower output power when input voltage is

lower than 4.5 V+-0.3, and will shut off output to protect main circuit if worse.

8. Over- voltage protection: applying forcibly protection, can automatically damage

protection components when the input voltage is higher than 10V, to protect main

circuit. ( please apply suitable adapter).

9. Over-temperature protection：will

enter into protection directly when temperature is

detected to reach over 60℃ and can be recovered to work normally when temperature

is down.

1. Please

place your charge device on the suitable position ( reference on the last page);

2. Please use suitable power adapter or it will affect wireless charging efficiency.

3. Can

use dry cloth to wipe and clean the charger housing, chemical cleaners banned.

4. Please

don’t put bus card, bank card, ID card or any card with magnetic on the side of

charger during usage of charger, or it may lose storage information.

5. Avoid

of using under the conditions of low temperature, wet, dust, strong sunshine, high

temperature, crash, exposure of light, etc.

6. Disassemble

housing is not allowed.

Indication LED

Charger Anti-Slip Mat

Usage:

Wireless Charger Manual

Best matching condition

in induction area

Indication led

Area.1

Area.2

Please read the manual carefully before using

2.During charging,4 LED indicators will fully bright when cellphone completely

stays on the induction area.

Note

: if no induction chip in your cellphone, please match and wear

suitable induction cover on your cellphone, then it can be charged.

Put your cellphone on the charging pad and connect suitable adapter to the

wireless charger.